gsmopen: adding libctb-0.16

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/module/linux/ctb.py

@@ -0,0 +1,455 @@
+import wxctb, sys, re
+
+DCD = wxctb.LinestateDcd
+CTS = wxctb.LinestateCts
+DSR = wxctb.LinestateDsr
+DTR = wxctb.LinestateDtr
+RING = wxctb.LinestateRing
+RTS = wxctb.LinestateRts
+NULL = wxctb.LinestateNull
+
+def abstract():
+    import inspect
+    caller = inspect.getouterframes(inspect.currentframe())[1][3]
+    raise NotImplementedError(caller + ' must be implemented in subclass')
+
+class IOBase:
+    def __init__(self):
+        self.device = None
+        # set timeout to 1000ms (the default)
+        self.timeout = 1000
+        
+    def __del__(self):
+        pass
+    
+    def Close(self):
+        if self.device:
+            self.device.Close()
+
+    def GetTimeout(self):
+        """
+        Returns the internal timeout value in milliseconds
+        """
+        return self.timeout
+
+    def Ioctl(self,cmd,arg):
+        if self.device:
+            self.device.Ioctl(cmd,arg)
+            
+    def Open(self):
+        abstract()
+
+    def PutBack(self,char):
+        return self.device.PutBack(char)
+    
+    def Read(self,length):
+        """
+        Try to read the given count of data (length) and returns the
+        successfully readed number of data. The function never blocks.
+        For example:
+        readed = dev.Read(100)
+        """
+        buf = "\x00"*(length+1)
+        rd = self.device.Read(buf,length)
+        return buf[0:rd]
+
+    def ReadBinary(self,eos="\n"):
+        """
+        Special SCPI command. Read the next data coded as a SCPI
+        binary format.
+        A binary data transfer will be startet by '#'. The next byte
+        tells the count of bytes for the binary length header,
+        following by the length bytes. After these the data begins.
+        For example:
+        #500004xxxx
+        The header length covers 5 Byte, the length of the binary
+        data is 4 (x means the binary data bytes)
+        """
+        try:
+            eoslen = len(eos)
+            b=self.Readv(2)
+            if len(b) == 2:
+                hl = int(b[1])
+                b = self.Readv(hl)
+                if len(b) == hl:
+                    dl = int(b)
+                    # don't left over the eos string or character in the
+                    # device input buffer
+                    data = self.Readv(dl+eoslen)
+                    # check, if the binary data block is complete
+                    if data[dl] == '#':
+                        # not complete, another block is following
+                        for c in data[dl:dl+eoslen]:
+                            self.PutBack(c)
+
+                        data = data[:dl] + self.ReadBinary()
+                    return data
+        except:
+            pass
+        return ''
+
+    def ReadUntilEOS(self,eos="\n",quota=0):
+        """
+        ReadUntilEOS(eosString=\"\\n\",timeout=1000)
+        Reads data until the given eos string was received (default is
+        the linefeed character (0x0a) or the internal timeout
+        (default 1000ms) was reached.
+        ReadUntilEOS returns the result as the following tuple:
+        ['received string',state,readedBytes]
+        If a timeout occurred, state is 0, otherwise 1
+        """
+        return self.device.ReadUntilEOS("",0,eos,self.timeout,quota)
+
+    def Readv(self,length):
+        """
+        Try to read the given count of data. Readv blocks until all data
+        was readed successfully or the internal timeout, set with the
+        class member function SetTimeout(timeout), was reached.
+        Returns the readed data.
+        """
+        buf = "\x00"*length
+        rd = self.device.Readv(buf,length,self.timeout)
+        return buf[0:rd]
+
+    def ResetBus(self):
+        """
+        If the underlaying interface needs some special reset operations
+        (for instance the GPIB distinguish between a normal device reset
+        and a special bus reset), you can put some code here)
+        """
+        pass
+
+    def SetTimeout(self,timeout):
+        """
+        Set the internal timeout value in milliseconds for all blocked
+        operations like ReadUntilEOS, Readv and Writev.
+        """
+        self.timeout = timeout
+        
+    def Write(self,string):
+        """
+        Writes the given string to the device and returns immediately.
+        Write returns the number of data bytes successfully written or a
+        negativ number if an error occured. For some circumstances, not
+        the complete string was written.
+        So you have to verify the return value to check this out.
+        """
+        return self.device.Write(string,len(string))
+
+    def Writev(self,string):
+        """
+        Writes the given string to the device. The function blocks until
+        the complete string was written or the internal timeout, set with
+        SetTimeout(timeout), was reached.
+        Writev returns the number of data successfully written or a
+        negativ value, if an errors occurred.
+        """
+        return self.device.Writev(string,len(string),self.timeout)
+
+class SerialPort(IOBase):
+    def __init__(self):
+        IOBase.__init__(self)
+
+    def __del__(self):
+        self.Close()
+        
+    def ChangeLineState(self,lineState):
+        """
+        Change (toggle) the state of each the lines given in the
+        linestate parameter. Possible values are DTR and/or RTS.
+        For example to toggle the RTS line only:
+        dev.ChangeLineState(RTS)
+        """
+        self.device.ChangeLineState(lineState)
+
+    def ClrLineState(self,lineState):
+        """
+        Clear the lines given in the linestate parameter. Possible
+        values are DTR and/or RTS. For example to clear only
+        the RTS line:
+        dev.ClrLineState(RTS)
+        """
+        self.device.ClrLineState(lineState)
+
+    def GetAvailableBytes(self):
+        """
+        Returns the available bytes in the input queue of the serial
+        driver.
+        """
+        n = wxctb.new_intp()
+        wxctb.intp_assign(n, 0)
+        self.device.Ioctl(wxctb.CTB_SER_GETINQUE,n)
+        return wxctb.intp_value(n)
+
+    def GetCommErrors(self):
+        """
+        Get the internal communication errors like breaks, framing,
+        parity or overrun errors.
+        Returns the count of each error as a tuple like this:
+        (b,f,o,p) = dev.GetCommErrors()
+        b: breaks, f: framing errors,  o: overruns, p: parity errors
+        """
+        einfo = wxctb.SerialPort_EINFO()
+        self.device.Ioctl(wxctb.CTB_SER_GETEINFO,einfo)
+        return einfo.brk,einfo.frame,einfo.overrun,einfo.parity
+    
+    def GetLineState(self):
+        """
+        Returns the current linestates of the CTS, DCD, DSR and RING
+        signal line as an integer value with the appropriate bits or
+        -1 on error.
+        For example:
+        lines = dev.GetLineState()
+        if lines & CTS:
+            print \"CTS is on\"
+        """
+        return self.device.GetLineState()
+
+    def Open(self,devname,baudrate,protocol='8N1',handshake='no_handshake'):
+        """
+        Open the device devname with the given baudrate, the protocol
+        like '8N1' (default) and the use of the handshake [no_handshake
+        (default), rtscts or xonxoff]
+        For example:
+        At Linux:
+        dev = SerialPort()
+        dev.Open(\"/dev/ttyS0\",115200)
+        or with a datalen of 7 bits, even parity, 2 stopbits and rts/cts
+        handshake:
+        dev.Open(\"/dev/ttyS0\",115200,'7E2',True)
+        At Windows:
+        dev = SerialPort()
+        dev.Open(\"COM1\",115200)
+        dev.Open(\"COM1\",115200,'7E2',True)
+        Returns the handle on success or a negativ value on failure.
+        """
+        # the following parity values are valid:
+        # N:None, O:Odd, E:Even, M:Mark, S:Space
+        parity = {'N':0,'O':1,'E':2,'M':3,'S':4}
+        # the regular expression ensures a valid value for the datalen
+        # (5...8 bit) and the count of stopbits (1,2)
+        reg=re.compile(r"(?P<w>[8765])"r"(?P<p>[NOEMS])"r"(?P<s>[12])")
+        self.device = wxctb.SerialPort()
+        dcs = wxctb.SerialPort_DCS()
+        dcs.baud = baudrate
+        res = reg.search(protocol)
+        # handle the given protocol
+        if res:
+            dcs.wordlen = int(res.group('w'))
+            dcs.stopbits = int(res.group('s'))
+            dcs.parity = parity[res.group('p')]
+        # valid handshake are no one, rts/cts or xon/xoff
+        if handshake == 'rtscts':
+            dcs.rtscts = True
+        elif handshake == 'xonxoff':
+            dcs.xonxoff = True
+        
+        return self.device.Open(devname,dcs)
+    
+    def Reset(self):
+        """
+        Send a break for 0.25s.
+        """
+        self.device.SendBreak(0)
+
+    def SetBaudrate(self,baudrate):
+        """
+        Set the baudrate for the device.
+        """
+        self.device.SetBaudrate(baudrate)
+
+    def SetLineState(self,lineState):
+        """
+        Set the lines given in the linestate parameter. Possible
+        values are DTR and/or RTS. For example to set both:
+        dev.SetLineState( DTR | RTS)
+        """
+        self.device.SetLineState(lineState)
+
+    def SetParityBit(self,parity):
+        """
+        Set the parity bit explicitly to 0 or 1. Use this function, if
+        you would like to simulate a 9 bit wordlen at what the ninth bit
+        was represented by the parity bit value. For example:
+        dev.SetParityBit( 0 )
+        dev.Write('some data sent with parity 0')
+        dev.SetParityBit( 1 )
+        dev.Write('another sequence with parity 1')
+        """
+        return self.device.SetParityBit( parity )
+
+class GpibDevice(IOBase):
+    """
+    GPIB class
+    """
+    def __init__(self):
+        IOBase.__init__(self)
+
+    def __del__(self):
+        self.Close()
+
+    def FindListeners(self,board = 0):
+        """
+        Returns the address of the connected devices as a list.
+        If no device is listening, the list is empty. If an error
+        occurs an IOError exception raised. For example:
+        g = GPIB()
+        listeners = g.FindListeners()
+        """
+        listeners = wxctb.GPIB_x_FindListeners(board)
+        if listeners < 0:
+            raise IOError("GPIB board error")
+        result = []
+        for i in range(1,31):
+            if listeners & (1 << i):
+                result.append(i)
+        return result
+
+    def GetEosChar(self):
+        """
+        Get the internal EOS termination character (see SetEosChar).
+        For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosChar()
+        """
+        eos = wxctb.new_intp()
+        wxctb.intp_assign(eos, 0)
+        self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_CHAR,eos)
+        return wxctb.intp_value(eos)
+        
+    def GetEosMode(self):
+        """
+        Get the internal EOS mode (see SetEosMode).
+        For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosMode()
+        """
+        mode = wxctb.new_intp()
+        wxctb.intp_assign(mode, 0)
+        self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_MODE,mode)
+        return wxctb.intp_value(mode)
+
+    def GetError(self):
+        errorString = " "*256
+        self.device.GetError(errorString,256)
+        return errorString
+
+    def GetSTB(self):
+        """
+        Returns the value of the internal GPIB status byte register.
+        """
+        stb = wxctb.new_intp()
+        wxctb.intp_assign(stb, 0)
+        self.device.Ioctl(wxctb.CTB_GPIB_GETRSP,stb)
+        return wxctb.intp_value(stb)
+
+    # This is only for internal usage!!!
+    def Ibrd(self,length):
+        buf = "\x00"*length
+        state = self.device.Ibrd(buf,length)
+        return state,buf
+
+    # This is only for internal usage!!!
+    def Ibwrt(self,string):
+        return self.device.Ibwrt(string,len(string))
+
+    def Open(self,devname,adr,eosChar=10,eosMode=0x08|0x04):
+        """
+        Open(gpibdevice,address,eosChar,eosMode)
+        Opens a connected device at the GPIB bus. gpibdevice means the
+        controller, (mostly \"gpib1\"), address the address of the desired
+        device in the range 1...31. The eosChar defines the EOS character
+        (default is linefeed), eosMode may be a combination of bits ORed
+        together. The following bits can be used:
+        0x04: Terminate read when EOS is detected.
+        0x08: Set EOI (End or identify line) with EOS on write function
+        0x10: Compare all 8 bits of EOS byte rather than low 7 bits
+              (all read and write functions). Default is 0x12
+        For example:
+        dev = GPIB()
+        dev.Open(\"gpib1\",17)
+        Opens the device with the address 17, linefeed as EOS (default)
+        and eos mode with 0x04 and 0x08.
+        Open returns >= 0 or a negativ value, if something going wrong.
+        """
+        self.device = wxctb.GpibDevice()
+        dcs = wxctb.Gpib_DCS()
+        dcs.m_address1 = adr
+        dcs.m_eosChar = eosChar
+        dcs.m_eosMode = eosMode
+        result = self.device.Open(devname,dcs)
+        return result
+    
+    def Reset(self):
+        """
+        Resets the connected device. In the GPIB definition, the device
+        should be reset to it's initial state, so you can restart a
+        formely lost communication.
+        """
+        self.device.Ioctl(wxctb.CTB_RESET,None)
+
+    def ResetBus(self):
+        """
+        The command asserts the GPIB interface clear (IFC) line for
+        ast least 100us if the GPIB board is the system controller.
+        This initializes the GPIB and makes the interface CIC and
+        active controller with ATN asserted.
+        Note! The IFC signal resets only the GPIB interface functions
+        of the bus devices and not the internal device functions.
+        For a device reset you should use the Reset() command above.
+        """
+        self.device.Ioctl(wxctb.CTB_GPIB_RESET_BUS,None)
+
+    def SetEosChar(self,eos):
+        """
+        Configure the end-of-string (EOS) termination character.
+        Note! Defining an EOS byte does not cause the driver to
+        automatically send that byte at the end of write I/O
+        operations. The application is responsible for placing the
+        EOS byte at the end of the data strings that it defines.
+        (National Instruments NI-488.2M Function Reference Manual)
+        For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosChar(0x10)
+        """
+        intp = wxctb.new_intp()
+        wxctb.intp_assign(intp, eos)
+        return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_CHAR,intp)
+        
+    def SetEosMode(self,mode):
+        """
+        Set the EOS mode (handling).m_eosMode may be a combination 
+        of bits ORed together. The following bits can be used:
+        0x04: Terminate read when EOS is detected.
+        0x08: Set EOI (End or identify line) with EOS on write function
+        0x10: Compare all 8 bits of EOS byte rather than low 7 bits
+        (all read and write functions). For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosMode(0x04 | 0x08)
+        """
+        intp = wxctb.new_intp()
+        wxctb.intp_assign(intp, mode)
+        return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_MODE,intp)
+        
+def GetKey():
+    """
+    Returns the current pressed key or '\0', if no key is pressed.
+    You can simply create a query loop with:
+    while GetKey() == '\0':
+        ... make some stuff ...
+
+    """
+    return wxctb.GetKey()
+
+def GetVersion():
+    """
+    Returns the version of the ctb python module. The numbering
+    has the following format: x.y.z
+    x.y means the version of the underlaying ctb lib, z the version
+    of the python port.
+    """
+    return "0.16"

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/module/linux/wxctb.py

@@ -0,0 +1,264 @@
+# This file was automatically generated by SWIG (http://www.swig.org).
+# Version 1.3.40
+#
+# Do not make changes to this file unless you know what you are doing--modify
+# the SWIG interface file instead.
+
+from sys import version_info
+if version_info >= (2,6,0):
+    def swig_import_helper():
+        from os.path import dirname
+        import imp
+        fp = None
+        try:
+            fp, pathname, description = imp.find_module('_wxctb', [dirname(__file__)])
+        except ImportError:
+            import _wxctb
+            return _wxctb
+        if fp is not None:
+            try:
+                _mod = imp.load_module('_wxctb', fp, pathname, description)
+            finally:
+                fp.close()
+            return _mod
+    _wxctb = swig_import_helper()
+    del swig_import_helper
+else:
+    import _wxctb
+del version_info
+try:
+    _swig_property = property
+except NameError:
+    pass # Python < 2.2 doesn't have 'property'.
+def _swig_setattr_nondynamic(self,class_type,name,value,static=1):
+    if (name == "thisown"): return self.this.own(value)
+    if (name == "this"):
+        if type(value).__name__ == 'SwigPyObject':
+            self.__dict__[name] = value
+            return
+    method = class_type.__swig_setmethods__.get(name,None)
+    if method: return method(self,value)
+    if (not static) or hasattr(self,name):
+        self.__dict__[name] = value
+    else:
+        raise AttributeError("You cannot add attributes to %s" % self)
+
+def _swig_setattr(self,class_type,name,value):
+    return _swig_setattr_nondynamic(self,class_type,name,value,0)
+
+def _swig_getattr(self,class_type,name):
+    if (name == "thisown"): return self.this.own()
+    method = class_type.__swig_getmethods__.get(name,None)
+    if method: return method(self)
+    raise AttributeError(name)
+
+def _swig_repr(self):
+    try: strthis = "proxy of " + self.this.__repr__()
+    except: strthis = ""
+    return "<%s.%s; %s >" % (self.__class__.__module__, self.__class__.__name__, strthis,)
+
+try:
+    _object = object
+    _newclass = 1
+except AttributeError:
+    class _object : pass
+    _newclass = 0
+
+
+def _swig_setattr_nondynamic_method(set):
+    def set_attr(self,name,value):
+        if (name == "thisown"): return self.this.own(value)
+        if hasattr(self,name) or (name == "this"):
+            set(self,name,value)
+        else:
+            raise AttributeError("You cannot add attributes to %s" % self)
+    return set_attr
+
+
+
+def new_intp():
+  return _wxctb.new_intp()
+new_intp = _wxctb.new_intp
+
+def copy_intp(*args, **kwargs):
+  return _wxctb.copy_intp(*args, **kwargs)
+copy_intp = _wxctb.copy_intp
+
+def delete_intp(*args, **kwargs):
+  return _wxctb.delete_intp(*args, **kwargs)
+delete_intp = _wxctb.delete_intp
+
+def intp_assign(*args, **kwargs):
+  return _wxctb.intp_assign(*args, **kwargs)
+intp_assign = _wxctb.intp_assign
+
+def intp_value(*args, **kwargs):
+  return _wxctb.intp_value(*args, **kwargs)
+intp_value = _wxctb.intp_value
+class timer_control(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    def __init__(self, *args, **kwargs): raise AttributeError("No constructor defined")
+    __repr__ = _swig_repr
+    usecs = _swig_property(_wxctb.timer_control_usecs_get, _wxctb.timer_control_usecs_set)
+    exitflag = _swig_property(_wxctb.timer_control_exitflag_get, _wxctb.timer_control_exitflag_set)
+    exitfnc = _swig_property(_wxctb.timer_control_exitfnc_get, _wxctb.timer_control_exitfnc_set)
+timer_control_swigregister = _wxctb.timer_control_swigregister
+timer_control_swigregister(timer_control)
+
+class Timer(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    def __init__(self, *args, **kwargs): 
+        this = _wxctb.new_Timer(*args, **kwargs)
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_Timer
+    __del__ = lambda self : None;
+    def start(self): return _wxctb.Timer_start(self)
+    def stop(self): return _wxctb.Timer_stop(self)
+Timer_swigregister = _wxctb.Timer_swigregister
+Timer_swigregister(Timer)
+
+
+def sleepms(*args, **kwargs):
+  return _wxctb.sleepms(*args, **kwargs)
+sleepms = _wxctb.sleepms
+CTB_RESET = _wxctb.CTB_RESET
+class IOBase(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    def __init__(self, *args, **kwargs): raise AttributeError("No constructor defined - class is abstract")
+    __repr__ = _swig_repr
+    __swig_destroy__ = _wxctb.delete_IOBase
+    __del__ = lambda self : None;
+    def ClassName(self): return _wxctb.IOBase_ClassName(self)
+    def Close(self): return _wxctb.IOBase_Close(self)
+    def Ioctl(self, *args, **kwargs): return _wxctb.IOBase_Ioctl(self, *args, **kwargs)
+    def IsOpen(self): return _wxctb.IOBase_IsOpen(self)
+    def Open(self, *args, **kwargs): return _wxctb.IOBase_Open(self, *args, **kwargs)
+    def PutBack(self, *args, **kwargs): return _wxctb.IOBase_PutBack(self, *args, **kwargs)
+    def Read(self, *args, **kwargs): return _wxctb.IOBase_Read(self, *args, **kwargs)
+    def ReadUntilEOS(self, *args, **kwargs): return _wxctb.IOBase_ReadUntilEOS(self, *args, **kwargs)
+    def Readv(self, *args, **kwargs): return _wxctb.IOBase_Readv(self, *args, **kwargs)
+    def Write(self, *args, **kwargs): return _wxctb.IOBase_Write(self, *args, **kwargs)
+    def Writev(self, *args, **kwargs): return _wxctb.IOBase_Writev(self, *args, **kwargs)
+IOBase_swigregister = _wxctb.IOBase_swigregister
+IOBase_swigregister(IOBase)
+
+ParityNone = _wxctb.ParityNone
+ParityOdd = _wxctb.ParityOdd
+ParityEven = _wxctb.ParityEven
+ParityMark = _wxctb.ParityMark
+ParitySpace = _wxctb.ParitySpace
+LinestateDcd = _wxctb.LinestateDcd
+LinestateCts = _wxctb.LinestateCts
+LinestateDsr = _wxctb.LinestateDsr
+LinestateDtr = _wxctb.LinestateDtr
+LinestateRing = _wxctb.LinestateRing
+LinestateRts = _wxctb.LinestateRts
+LinestateNull = _wxctb.LinestateNull
+class SerialPort_DCS(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    baud = _swig_property(_wxctb.SerialPort_DCS_baud_get, _wxctb.SerialPort_DCS_baud_set)
+    parity = _swig_property(_wxctb.SerialPort_DCS_parity_get, _wxctb.SerialPort_DCS_parity_set)
+    wordlen = _swig_property(_wxctb.SerialPort_DCS_wordlen_get, _wxctb.SerialPort_DCS_wordlen_set)
+    stopbits = _swig_property(_wxctb.SerialPort_DCS_stopbits_get, _wxctb.SerialPort_DCS_stopbits_set)
+    rtscts = _swig_property(_wxctb.SerialPort_DCS_rtscts_get, _wxctb.SerialPort_DCS_rtscts_set)
+    xonxoff = _swig_property(_wxctb.SerialPort_DCS_xonxoff_get, _wxctb.SerialPort_DCS_xonxoff_set)
+    buf = _swig_property(_wxctb.SerialPort_DCS_buf_get, _wxctb.SerialPort_DCS_buf_set)
+    def __init__(self): 
+        this = _wxctb.new_SerialPort_DCS()
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_SerialPort_DCS
+    __del__ = lambda self : None;
+    def GetSettings(self): return _wxctb.SerialPort_DCS_GetSettings(self)
+SerialPort_DCS_swigregister = _wxctb.SerialPort_DCS_swigregister
+SerialPort_DCS_swigregister(SerialPort_DCS)
+
+class SerialPort_EINFO(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    brk = _swig_property(_wxctb.SerialPort_EINFO_brk_get, _wxctb.SerialPort_EINFO_brk_set)
+    frame = _swig_property(_wxctb.SerialPort_EINFO_frame_get, _wxctb.SerialPort_EINFO_frame_set)
+    overrun = _swig_property(_wxctb.SerialPort_EINFO_overrun_get, _wxctb.SerialPort_EINFO_overrun_set)
+    parity = _swig_property(_wxctb.SerialPort_EINFO_parity_get, _wxctb.SerialPort_EINFO_parity_set)
+    def __init__(self): 
+        this = _wxctb.new_SerialPort_EINFO()
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_SerialPort_EINFO
+    __del__ = lambda self : None;
+SerialPort_EINFO_swigregister = _wxctb.SerialPort_EINFO_swigregister
+SerialPort_EINFO_swigregister(SerialPort_EINFO)
+
+CTB_SER_GETEINFO = _wxctb.CTB_SER_GETEINFO
+CTB_SER_GETBRK = _wxctb.CTB_SER_GETBRK
+CTB_SER_GETFRM = _wxctb.CTB_SER_GETFRM
+CTB_SER_GETOVR = _wxctb.CTB_SER_GETOVR
+CTB_SER_GETPAR = _wxctb.CTB_SER_GETPAR
+CTB_SER_GETINQUE = _wxctb.CTB_SER_GETINQUE
+CTB_SER_SETPAR = _wxctb.CTB_SER_SETPAR
+class SerialPort_x(IOBase):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    def __init__(self, *args, **kwargs): raise AttributeError("No constructor defined - class is abstract")
+    __repr__ = _swig_repr
+    __swig_destroy__ = _wxctb.delete_SerialPort_x
+    __del__ = lambda self : None;
+    def ClassName(self): return _wxctb.SerialPort_x_ClassName(self)
+    def ChangeLineState(self, *args, **kwargs): return _wxctb.SerialPort_x_ChangeLineState(self, *args, **kwargs)
+    def ClrLineState(self, *args, **kwargs): return _wxctb.SerialPort_x_ClrLineState(self, *args, **kwargs)
+    def GetLineState(self): return _wxctb.SerialPort_x_GetLineState(self)
+    def GetSettingsAsString(self): return _wxctb.SerialPort_x_GetSettingsAsString(self)
+    def Ioctl(self, *args, **kwargs): return _wxctb.SerialPort_x_Ioctl(self, *args, **kwargs)
+    def SendBreak(self, *args, **kwargs): return _wxctb.SerialPort_x_SendBreak(self, *args, **kwargs)
+    def SetBaudrate(self, *args, **kwargs): return _wxctb.SerialPort_x_SetBaudrate(self, *args, **kwargs)
+    def SetLineState(self, *args, **kwargs): return _wxctb.SerialPort_x_SetLineState(self, *args, **kwargs)
+    def SetParityBit(self, *args, **kwargs): return _wxctb.SerialPort_x_SetParityBit(self, *args, **kwargs)
+    IsStandardRate = staticmethod(_wxctb.SerialPort_x_IsStandardRate)
+SerialPort_x_swigregister = _wxctb.SerialPort_x_swigregister
+SerialPort_x_swigregister(SerialPort_x)
+
+def SerialPort_x_IsStandardRate(*args, **kwargs):
+  return _wxctb.SerialPort_x_IsStandardRate(*args, **kwargs)
+SerialPort_x_IsStandardRate = _wxctb.SerialPort_x_IsStandardRate
+
+COM1 = "/dev/ttyS0"
+COM2 = "/dev/ttyS1"
+COM3 = "/dev/ttyS2"
+COM4 = "/dev/ttyS3"
+COM5 = "/dev/ttyS4"
+COM6 = "/dev/ttyS5"
+COM7 = "/dev/ttyS6"
+COM8 = "/dev/ttyS7"
+COM9 = "/dev/ttyS8"
+
+class SerialPort(SerialPort_x):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    def __init__(self): 
+        this = _wxctb.new_SerialPort()
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_SerialPort
+    __del__ = lambda self : None;
+    def ChangeLineState(self, *args, **kwargs): return _wxctb.SerialPort_ChangeLineState(self, *args, **kwargs)
+    def ClrLineState(self, *args, **kwargs): return _wxctb.SerialPort_ClrLineState(self, *args, **kwargs)
+    def GetLineState(self): return _wxctb.SerialPort_GetLineState(self)
+    def Ioctl(self, *args, **kwargs): return _wxctb.SerialPort_Ioctl(self, *args, **kwargs)
+    def IsOpen(self): return _wxctb.SerialPort_IsOpen(self)
+    def Read(self, *args, **kwargs): return _wxctb.SerialPort_Read(self, *args, **kwargs)
+    def SendBreak(self, *args, **kwargs): return _wxctb.SerialPort_SendBreak(self, *args, **kwargs)
+    def SetBaudrate(self, *args, **kwargs): return _wxctb.SerialPort_SetBaudrate(self, *args, **kwargs)
+    def SetLineState(self, *args, **kwargs): return _wxctb.SerialPort_SetLineState(self, *args, **kwargs)
+    def SetParityBit(self, *args, **kwargs): return _wxctb.SerialPort_SetParityBit(self, *args, **kwargs)
+    def Write(self, *args, **kwargs): return _wxctb.SerialPort_Write(self, *args, **kwargs)
+SerialPort_swigregister = _wxctb.SerialPort_swigregister
+SerialPort_swigregister(SerialPort)
+
+
+def GetKey():
+  return _wxctb.GetKey()
+GetKey = _wxctb.GetKey
+
+

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/samples/parity.py

@@ -0,0 +1,70 @@
+#!/usr/bin/python
+
+import getopt, time, sys
+
+sys.path.insert( 0, r'/home/jb/project/libctb-0.16/python/module/linux') 
+
+import ctb
+
+def main():
+
+    baudrate = 19200
+
+    devname = ""
+
+    protocol = '8N1'
+
+    try:
+        opt,arg = getopt.getopt(sys.argv[1:],
+                                'b:d:p:',
+                                ['baudrate=',
+                                 'device=',
+                                 'protocol='
+                                 ])
+
+    except getopt.GetoptError:
+        print "usage: parity.py [options]\n"\
+              "\t-b baudrate\n"\
+              "\t--baudrate=baudrate"\
+              "\t-d device\n"\
+              "\t--device=serial device name like /dev/ttyS0 or COM1\n"\
+              "\t-h\n"\
+              "\t--help print this\n"\
+              "\n"
+        sys.exit(0)
+
+    for o,a in opt:
+
+        if o in ("-b","--baudrate"):
+
+            baudrate = int(a)
+
+        if o in ("-d","--device"):
+
+            devname = a
+
+        if o in ("-p","--protocol"):
+
+            protocol = a
+
+
+    print "Using ctb version " + ctb.GetVersion()
+
+    dev = ctb.SerialPort()
+
+    if dev.Open( devname, baudrate, protocol ) < 0:
+
+        print "Cannot open " + devname +  "\n"
+
+    # send the following string with a always set parity bit
+    dev.SetParityBit( 1 )
+
+    dev.Writev( "Hello World" )
+
+    # send the following string with a always cleared parity bit
+    dev.SetParityBit( 0 )
+
+    dev.Writev( "Hello World" )
+
+main()
+

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/samples/protocol.py

@@ -0,0 +1,88 @@
+#!/usr/bin/python
+
+import getopt, time, sys
+
+sys.path.insert( 0, r'/home/jb/project/libctb-0.16/python/module/linux') 
+
+import ctb
+
+def DataBlock():
+    data = ''
+    for c in range( 0, 256):
+        data += '%c' % c
+
+    return data
+
+def main():
+
+    baudrate = 19200
+
+    devname = ""
+
+    try:
+        opt,arg = getopt.getopt(sys.argv[1:],
+                                'b:d:',
+                                ['baudrate=',
+                                 'device='
+                                 ])
+
+    except getopt.GetoptError:
+        print "usage: protocol.py [options]\n"\
+              "\t-b baudrate\n"\
+              "\t--baudrate=baudrate"\
+              "\t-d device\n"\
+              "\t--device=serial device name like /dev/ttyS0 or COM1\n"\
+              "\t-h\n"\
+              "\t--help print this\n"\
+              "\n"
+        sys.exit(0)
+
+    for o,a in opt:
+
+        if o in ("-b","--baudrate"):
+
+            baudrate = int(a)
+
+        if o in ("-d","--device"):
+
+            devname = a
+
+    print "Using ctb version " + ctb.GetVersion()
+
+    dev = ctb.SerialPort()
+
+    protocols = [
+        '8N1','8O1','8E1','8S1','8M1'
+        ]
+
+    dev.SetTimeout( 1000 )
+
+    for protocol in protocols:
+
+        if dev.Open( devname, baudrate, protocol ) < 0:
+
+            print "Cannot open " + devname +  "\n"
+
+            sys.exit( 1 )
+
+        else:
+
+            print( "%i %s" % ( baudrate, protocol ) )
+
+            for i in range(0, 4 ):
+
+                 dev.Writev( "\x33" )
+
+                 time.sleep( 0.0006 )
+
+                 dev.Writev( "\x31" )
+
+                 time.sleep( 0.0006 )
+
+            time.sleep( 0.5 )
+            
+            dev.Close()
+
+
+main()
+

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/samples/rtsdtr.py

@@ -0,0 +1,53 @@
+#!/usr/bin/python
+
+import getopt, time, sys
+
+sys.path.insert( 0, r'/home/jb/project/libctb-0.16/python/module/linux') 
+
+import ctb
+
+def main():
+
+    devname = ""
+
+    try:
+        opt,arg = getopt.getopt(sys.argv[1:],
+                                'd:',
+                                ['device='
+                                 ])
+
+    except getopt.GetoptError:
+        print "usage: parity.py [options]\n"\
+              "\t-d device\n"\
+              "\t--device=serial device name like /dev/ttyS0 or COM1\n"\
+              "\t-h\n"\
+              "\t--help print this\n"\
+              "\n"
+        sys.exit(0)
+
+    for o,a in opt:
+
+        if o in ("-d","--device"):
+
+            devname = a
+
+    print "Using ctb version " + ctb.GetVersion()
+
+    dev = ctb.SerialPort()
+
+    if dev.Open( devname, 38400 ) < 0:
+
+        print "Cannot open " + devname +  "\n"
+
+    dev.SetLineState( ctb.DTR )
+
+    dev.ClrLineState( ctb.RTS )
+
+    for i in range( 0, 100 ) :
+        
+        time.sleep( 0.01 )
+
+        dev.ChangeLineState( ctb.DTR | ctb.RTS )
+
+main()
+

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/ctb.html

@@ -0,0 +1,353 @@
+
+<!doctype html PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
+<html><head><title>Python: module ctb</title>
+</head><body bgcolor="#f0f0f8">
+
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="heading">
+<tr bgcolor="#7799ee">
+<td valign=bottom>&nbsp;<br>
+<font color="#ffffff" face="helvetica, arial">&nbsp;<br><big><big><strong>ctb</strong></big></big></font></td
+><td align=right valign=bottom
+><font color="#ffffff" face="helvetica, arial"><a href=".">index</a><br><a href="file:/mnt/s/wxaddons/wxctb-0.9/SWIG/ctb.py">/mnt/s/wxaddons/wxctb-0.9/SWIG/ctb.py</a></font></td></tr></table>
+    <p></p>
+<p>
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="section">
+<tr bgcolor="#aa55cc">
+<td colspan=3 valign=bottom>&nbsp;<br>
+<font color="#fffff" face="helvetica, arial"><big><strong>Modules</strong></big></font></td></tr>
+    
+<tr><td bgcolor="#aa55cc"><tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</tt></td><td>&nbsp;</td>
+<td width="100%"><table width="100%" summary="list"><tr><td width="25%" valign=top><a href="re.html">re</a><br>
+</td><td width="25%" valign=top><a href="sys.html">sys</a><br>
+</td><td width="25%" valign=top><a href="wxctb.html">wxctb</a><br>
+</td><td width="25%" valign=top></td></tr></table></td></tr></table><p>
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="section">
+<tr bgcolor="#ee77aa">
+<td colspan=3 valign=bottom>&nbsp;<br>
+<font color="#ffffff" face="helvetica, arial"><big><strong>Classes</strong></big></font></td></tr>
+    
+<tr><td bgcolor="#ee77aa"><tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</tt></td><td>&nbsp;</td>
+<td width="100%"><dl>
+<dt><font face="helvetica, arial"><a href="ctb.html#wxIOBase">wxIOBase</a>
+</font></dt><dd>
+<dl>
+<dt><font face="helvetica, arial"><a href="ctb.html#wxGPIB">wxGPIB</a>
+</font></dt><dt><font face="helvetica, arial"><a href="ctb.html#wxSerialPort">wxSerialPort</a>
+</font></dt></dl>
+</dd>
+</dl>
+ <p>
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="section">
+<tr bgcolor="#ffc8d8">
+<td colspan=3 valign=bottom>&nbsp;<br>
+<font color="#000000" face="helvetica, arial"><a name="wxGPIB">class <strong>wxGPIB</strong></a>(<a href="ctb.html#wxIOBase">wxIOBase</a>)</font></td></tr>
+    
+<tr bgcolor="#ffc8d8"><td rowspan=2><tt>&nbsp;&nbsp;&nbsp;</tt></td>
+<td colspan=2><tt><a href="#wxGPIB">wxGPIB</a>&nbsp;class<br>&nbsp;</tt></td></tr>
+<tr><td>&nbsp;</td>
+<td width="100%">Methods defined here:<br>
+<dl><dt><a name="wxGPIB-GetError"><strong>GetError</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxGPIB-GetSTB"><strong>GetSTB</strong></a>(self)</dt><dd><tt>Returns&nbsp;the&nbsp;value&nbsp;of&nbsp;the&nbsp;internal&nbsp;GPIB&nbsp;status&nbsp;byte&nbsp;register.</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Ibrd"><strong>Ibrd</strong></a>(self, length)</dt><dd><tt>#&nbsp;This&nbsp;is&nbsp;only&nbsp;for&nbsp;internal&nbsp;usage!!!</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Ibwrt"><strong>Ibwrt</strong></a>(self, string)</dt><dd><tt>#&nbsp;This&nbsp;is&nbsp;only&nbsp;for&nbsp;internal&nbsp;usage!!!</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Open"><strong>Open</strong></a>(self, devname, adr)</dt><dd><tt><a href="#wxGPIB-Open">Open</a>(gpibdevice,address)<br>
+Opens&nbsp;a&nbsp;connected&nbsp;device&nbsp;at&nbsp;the&nbsp;GPIB&nbsp;bus.&nbsp;gpibdevice&nbsp;means&nbsp;the<br>
+controller,&nbsp;(mostly&nbsp;"gpib1"),&nbsp;address&nbsp;the&nbsp;address&nbsp;of&nbsp;the&nbsp;desired<br>
+device&nbsp;in&nbsp;the&nbsp;range&nbsp;1...31.&nbsp;For&nbsp;example:<br>
+dev&nbsp;=&nbsp;<a href="#wxGPIB">wxGPIB</a>()<br>
+dev.<a href="#wxGPIB-Open">Open</a>("gpib1",17)<br>
+Opens&nbsp;the&nbsp;device&nbsp;with&nbsp;the&nbsp;address&nbsp;17.<br>
+Open&nbsp;returns&nbsp;&gt;=&nbsp;0&nbsp;or&nbsp;a&nbsp;negativ&nbsp;value,&nbsp;if&nbsp;something&nbsp;going&nbsp;wrong.</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Reset"><strong>Reset</strong></a>(self)</dt><dd><tt>Resets&nbsp;the&nbsp;connected&nbsp;device.&nbsp;In&nbsp;the&nbsp;GPIB&nbsp;definition,&nbsp;the&nbsp;device<br>
+should&nbsp;be&nbsp;reset&nbsp;to&nbsp;it's&nbsp;initial&nbsp;state,&nbsp;so&nbsp;you&nbsp;can&nbsp;restart&nbsp;a<br>
+formely&nbsp;lost&nbsp;communication.</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-ResetBus"><strong>ResetBus</strong></a>(self)</dt><dd><tt>The&nbsp;command&nbsp;asserts&nbsp;the&nbsp;GPIB&nbsp;interface&nbsp;clear&nbsp;(IFC)&nbsp;line&nbsp;for<br>
+ast&nbsp;least&nbsp;100us&nbsp;if&nbsp;the&nbsp;GPIB&nbsp;board&nbsp;is&nbsp;the&nbsp;system&nbsp;controller.<br>
+This&nbsp;initializes&nbsp;the&nbsp;GPIB&nbsp;and&nbsp;makes&nbsp;the&nbsp;interface&nbsp;CIC&nbsp;and<br>
+active&nbsp;controller&nbsp;with&nbsp;ATN&nbsp;asserted.<br>
+Note!&nbsp;The&nbsp;IFC&nbsp;signal&nbsp;resets&nbsp;only&nbsp;the&nbsp;GPIB&nbsp;interface&nbsp;functions<br>
+of&nbsp;the&nbsp;bus&nbsp;devices&nbsp;and&nbsp;not&nbsp;the&nbsp;internal&nbsp;device&nbsp;functions.<br>
+For&nbsp;a&nbsp;device&nbsp;reset&nbsp;you&nbsp;should&nbsp;use&nbsp;the&nbsp;<a href="#wxGPIB-Reset">Reset</a>()&nbsp;command&nbsp;above.</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-__del__"><strong>__del__</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxGPIB-__init__"><strong>__init__</strong></a>(self)</dt></dl>
+
+<hr>
+Methods inherited from <a href="ctb.html#wxIOBase">wxIOBase</a>:<br>
+<dl><dt><a name="wxGPIB-Close"><strong>Close</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxGPIB-GetTimeout"><strong>GetTimeout</strong></a>(self)</dt><dd><tt>Returns&nbsp;the&nbsp;internal&nbsp;timeout&nbsp;value&nbsp;in&nbsp;milliseconds</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Ioctl"><strong>Ioctl</strong></a>(self, cmd, arg)</dt></dl>
+
+<dl><dt><a name="wxGPIB-PutBack"><strong>PutBack</strong></a>(self, char)</dt></dl>
+
+<dl><dt><a name="wxGPIB-Read"><strong>Read</strong></a>(self, length)</dt><dd><tt>Try&nbsp;to&nbsp;read&nbsp;the&nbsp;given&nbsp;count&nbsp;of&nbsp;data&nbsp;(length)&nbsp;and&nbsp;returns&nbsp;the<br>
+successfully&nbsp;readed&nbsp;number&nbsp;of&nbsp;data.&nbsp;The&nbsp;function&nbsp;never&nbsp;blocks.<br>
+For&nbsp;example:<br>
+readed&nbsp;=&nbsp;dev.<a href="#wxGPIB-Read">Read</a>(100)</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-ReadBinary"><strong>ReadBinary</strong></a>(self, eos<font color="#909090">='<font color="#c040c0">\n</font>'</font>)</dt><dd><tt>Special&nbsp;SCPI&nbsp;command.&nbsp;Read&nbsp;the&nbsp;next&nbsp;data&nbsp;coded&nbsp;as&nbsp;a&nbsp;SCPI<br>
+binary&nbsp;format.<br>
+A&nbsp;binary&nbsp;data&nbsp;transfer&nbsp;will&nbsp;be&nbsp;startet&nbsp;by&nbsp;'#'.&nbsp;The&nbsp;next&nbsp;byte<br>
+tells&nbsp;the&nbsp;count&nbsp;of&nbsp;bytes&nbsp;for&nbsp;the&nbsp;binary&nbsp;length&nbsp;header,<br>
+following&nbsp;by&nbsp;the&nbsp;length&nbsp;bytes.&nbsp;After&nbsp;these&nbsp;the&nbsp;data&nbsp;begins.<br>
+For&nbsp;example:<br>
+#500004xxxx<br>
+The&nbsp;header&nbsp;length&nbsp;covers&nbsp;5&nbsp;Byte,&nbsp;the&nbsp;length&nbsp;of&nbsp;the&nbsp;binary<br>
+data&nbsp;is&nbsp;4&nbsp;(x&nbsp;means&nbsp;the&nbsp;binary&nbsp;data&nbsp;bytes)</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-ReadUntilEOS"><strong>ReadUntilEOS</strong></a>(self, eos<font color="#909090">='<font color="#c040c0">\n</font>'</font>, quota<font color="#909090">=0</font>)</dt><dd><tt><a href="#wxGPIB-ReadUntilEOS">ReadUntilEOS</a>(eosString="\n",timeout=1000)<br>
+Reads&nbsp;data&nbsp;until&nbsp;the&nbsp;given&nbsp;eos&nbsp;string&nbsp;was&nbsp;received&nbsp;(default&nbsp;is<br>
+the&nbsp;linefeed&nbsp;character&nbsp;(0x0a)&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout<br>
+(default&nbsp;1000ms)&nbsp;was&nbsp;reached.<br>
+ReadUntilEOS&nbsp;returns&nbsp;the&nbsp;result&nbsp;as&nbsp;the&nbsp;following&nbsp;tuple:<br>
+['received&nbsp;string',state,readedBytes]<br>
+If&nbsp;a&nbsp;timeout&nbsp;occurred,&nbsp;state&nbsp;is&nbsp;0,&nbsp;otherwise&nbsp;1</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Readv"><strong>Readv</strong></a>(self, length)</dt><dd><tt>Try&nbsp;to&nbsp;read&nbsp;the&nbsp;given&nbsp;count&nbsp;of&nbsp;data.&nbsp;Readv&nbsp;blocks&nbsp;until&nbsp;all&nbsp;data<br>
+was&nbsp;readed&nbsp;successfully&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout,&nbsp;set&nbsp;with&nbsp;the<br>
+class&nbsp;member&nbsp;function&nbsp;<a href="#wxGPIB-SetTimeout">SetTimeout</a>(timeout),&nbsp;was&nbsp;reached.<br>
+Returns&nbsp;the&nbsp;readed&nbsp;data.</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-SetTimeout"><strong>SetTimeout</strong></a>(self, timeout)</dt><dd><tt>Set&nbsp;the&nbsp;internal&nbsp;timeout&nbsp;value&nbsp;in&nbsp;milliseconds&nbsp;for&nbsp;all&nbsp;blocked<br>
+operations&nbsp;like&nbsp;ReadUntilEOS,&nbsp;Readv&nbsp;and&nbsp;Writev.</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Write"><strong>Write</strong></a>(self, string)</dt><dd><tt>Writes&nbsp;the&nbsp;given&nbsp;string&nbsp;to&nbsp;the&nbsp;device&nbsp;and&nbsp;returns&nbsp;immediately.<br>
+Write&nbsp;returns&nbsp;the&nbsp;number&nbsp;of&nbsp;data&nbsp;bytes&nbsp;successfully&nbsp;written&nbsp;or&nbsp;a<br>
+negativ&nbsp;number&nbsp;if&nbsp;an&nbsp;error&nbsp;occured.&nbsp;For&nbsp;some&nbsp;circumstances,&nbsp;not<br>
+the&nbsp;complete&nbsp;string&nbsp;was&nbsp;written.<br>
+So&nbsp;you&nbsp;have&nbsp;to&nbsp;verify&nbsp;the&nbsp;return&nbsp;value&nbsp;to&nbsp;check&nbsp;this&nbsp;out.</tt></dd></dl>
+
+<dl><dt><a name="wxGPIB-Writev"><strong>Writev</strong></a>(self, string)</dt><dd><tt>Writes&nbsp;the&nbsp;given&nbsp;string&nbsp;to&nbsp;the&nbsp;device.&nbsp;The&nbsp;function&nbsp;blocks&nbsp;until<br>
+the&nbsp;complete&nbsp;string&nbsp;was&nbsp;written&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout,&nbsp;set&nbsp;with<br>
+<a href="#wxGPIB-SetTimeout">SetTimeout</a>(timeout),&nbsp;was&nbsp;reached.<br>
+Writev&nbsp;returns&nbsp;the&nbsp;number&nbsp;of&nbsp;data&nbsp;successfully&nbsp;written&nbsp;or&nbsp;a<br>
+negativ&nbsp;value,&nbsp;if&nbsp;an&nbsp;errors&nbsp;occurred.</tt></dd></dl>
+
+</td></tr></table> <p>
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="section">
+<tr bgcolor="#ffc8d8">
+<td colspan=3 valign=bottom>&nbsp;<br>
+<font color="#000000" face="helvetica, arial"><a name="wxIOBase">class <strong>wxIOBase</strong></a></font></td></tr>
+    
+<tr><td bgcolor="#ffc8d8"><tt>&nbsp;&nbsp;&nbsp;</tt></td><td>&nbsp;</td>
+<td width="100%">Methods defined here:<br>
+<dl><dt><a name="wxIOBase-Close"><strong>Close</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxIOBase-GetTimeout"><strong>GetTimeout</strong></a>(self)</dt><dd><tt>Returns&nbsp;the&nbsp;internal&nbsp;timeout&nbsp;value&nbsp;in&nbsp;milliseconds</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-Ioctl"><strong>Ioctl</strong></a>(self, cmd, arg)</dt></dl>
+
+<dl><dt><a name="wxIOBase-Open"><strong>Open</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxIOBase-PutBack"><strong>PutBack</strong></a>(self, char)</dt></dl>
+
+<dl><dt><a name="wxIOBase-Read"><strong>Read</strong></a>(self, length)</dt><dd><tt>Try&nbsp;to&nbsp;read&nbsp;the&nbsp;given&nbsp;count&nbsp;of&nbsp;data&nbsp;(length)&nbsp;and&nbsp;returns&nbsp;the<br>
+successfully&nbsp;readed&nbsp;number&nbsp;of&nbsp;data.&nbsp;The&nbsp;function&nbsp;never&nbsp;blocks.<br>
+For&nbsp;example:<br>
+readed&nbsp;=&nbsp;dev.<a href="#wxIOBase-Read">Read</a>(100)</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-ReadBinary"><strong>ReadBinary</strong></a>(self, eos<font color="#909090">='<font color="#c040c0">\n</font>'</font>)</dt><dd><tt>Special&nbsp;SCPI&nbsp;command.&nbsp;Read&nbsp;the&nbsp;next&nbsp;data&nbsp;coded&nbsp;as&nbsp;a&nbsp;SCPI<br>
+binary&nbsp;format.<br>
+A&nbsp;binary&nbsp;data&nbsp;transfer&nbsp;will&nbsp;be&nbsp;startet&nbsp;by&nbsp;'#'.&nbsp;The&nbsp;next&nbsp;byte<br>
+tells&nbsp;the&nbsp;count&nbsp;of&nbsp;bytes&nbsp;for&nbsp;the&nbsp;binary&nbsp;length&nbsp;header,<br>
+following&nbsp;by&nbsp;the&nbsp;length&nbsp;bytes.&nbsp;After&nbsp;these&nbsp;the&nbsp;data&nbsp;begins.<br>
+For&nbsp;example:<br>
+#500004xxxx<br>
+The&nbsp;header&nbsp;length&nbsp;covers&nbsp;5&nbsp;Byte,&nbsp;the&nbsp;length&nbsp;of&nbsp;the&nbsp;binary<br>
+data&nbsp;is&nbsp;4&nbsp;(x&nbsp;means&nbsp;the&nbsp;binary&nbsp;data&nbsp;bytes)</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-ReadUntilEOS"><strong>ReadUntilEOS</strong></a>(self, eos<font color="#909090">='<font color="#c040c0">\n</font>'</font>, quota<font color="#909090">=0</font>)</dt><dd><tt><a href="#wxIOBase-ReadUntilEOS">ReadUntilEOS</a>(eosString="\n",timeout=1000)<br>
+Reads&nbsp;data&nbsp;until&nbsp;the&nbsp;given&nbsp;eos&nbsp;string&nbsp;was&nbsp;received&nbsp;(default&nbsp;is<br>
+the&nbsp;linefeed&nbsp;character&nbsp;(0x0a)&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout<br>
+(default&nbsp;1000ms)&nbsp;was&nbsp;reached.<br>
+ReadUntilEOS&nbsp;returns&nbsp;the&nbsp;result&nbsp;as&nbsp;the&nbsp;following&nbsp;tuple:<br>
+['received&nbsp;string',state,readedBytes]<br>
+If&nbsp;a&nbsp;timeout&nbsp;occurred,&nbsp;state&nbsp;is&nbsp;0,&nbsp;otherwise&nbsp;1</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-Readv"><strong>Readv</strong></a>(self, length)</dt><dd><tt>Try&nbsp;to&nbsp;read&nbsp;the&nbsp;given&nbsp;count&nbsp;of&nbsp;data.&nbsp;Readv&nbsp;blocks&nbsp;until&nbsp;all&nbsp;data<br>
+was&nbsp;readed&nbsp;successfully&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout,&nbsp;set&nbsp;with&nbsp;the<br>
+class&nbsp;member&nbsp;function&nbsp;<a href="#wxIOBase-SetTimeout">SetTimeout</a>(timeout),&nbsp;was&nbsp;reached.<br>
+Returns&nbsp;the&nbsp;readed&nbsp;data.</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-ResetBus"><strong>ResetBus</strong></a>(self)</dt><dd><tt>If&nbsp;the&nbsp;underlaying&nbsp;interface&nbsp;needs&nbsp;some&nbsp;special&nbsp;reset&nbsp;operations<br>
+(for&nbsp;instance&nbsp;the&nbsp;GPIB&nbsp;distinguish&nbsp;between&nbsp;a&nbsp;normal&nbsp;device&nbsp;reset<br>
+and&nbsp;a&nbsp;special&nbsp;bus&nbsp;reset),&nbsp;you&nbsp;can&nbsp;put&nbsp;some&nbsp;code&nbsp;here)</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-SetTimeout"><strong>SetTimeout</strong></a>(self, timeout)</dt><dd><tt>Set&nbsp;the&nbsp;internal&nbsp;timeout&nbsp;value&nbsp;in&nbsp;milliseconds&nbsp;for&nbsp;all&nbsp;blocked<br>
+operations&nbsp;like&nbsp;ReadUntilEOS,&nbsp;Readv&nbsp;and&nbsp;Writev.</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-Write"><strong>Write</strong></a>(self, string)</dt><dd><tt>Writes&nbsp;the&nbsp;given&nbsp;string&nbsp;to&nbsp;the&nbsp;device&nbsp;and&nbsp;returns&nbsp;immediately.<br>
+Write&nbsp;returns&nbsp;the&nbsp;number&nbsp;of&nbsp;data&nbsp;bytes&nbsp;successfully&nbsp;written&nbsp;or&nbsp;a<br>
+negativ&nbsp;number&nbsp;if&nbsp;an&nbsp;error&nbsp;occured.&nbsp;For&nbsp;some&nbsp;circumstances,&nbsp;not<br>
+the&nbsp;complete&nbsp;string&nbsp;was&nbsp;written.<br>
+So&nbsp;you&nbsp;have&nbsp;to&nbsp;verify&nbsp;the&nbsp;return&nbsp;value&nbsp;to&nbsp;check&nbsp;this&nbsp;out.</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-Writev"><strong>Writev</strong></a>(self, string)</dt><dd><tt>Writes&nbsp;the&nbsp;given&nbsp;string&nbsp;to&nbsp;the&nbsp;device.&nbsp;The&nbsp;function&nbsp;blocks&nbsp;until<br>
+the&nbsp;complete&nbsp;string&nbsp;was&nbsp;written&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout,&nbsp;set&nbsp;with<br>
+<a href="#wxIOBase-SetTimeout">SetTimeout</a>(timeout),&nbsp;was&nbsp;reached.<br>
+Writev&nbsp;returns&nbsp;the&nbsp;number&nbsp;of&nbsp;data&nbsp;successfully&nbsp;written&nbsp;or&nbsp;a<br>
+negativ&nbsp;value,&nbsp;if&nbsp;an&nbsp;errors&nbsp;occurred.</tt></dd></dl>
+
+<dl><dt><a name="wxIOBase-__del__"><strong>__del__</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxIOBase-__init__"><strong>__init__</strong></a>(self)</dt></dl>
+
+</td></tr></table> <p>
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="section">
+<tr bgcolor="#ffc8d8">
+<td colspan=3 valign=bottom>&nbsp;<br>
+<font color="#000000" face="helvetica, arial"><a name="wxSerialPort">class <strong>wxSerialPort</strong></a>(<a href="ctb.html#wxIOBase">wxIOBase</a>)</font></td></tr>
+    
+<tr><td bgcolor="#ffc8d8"><tt>&nbsp;&nbsp;&nbsp;</tt></td><td>&nbsp;</td>
+<td width="100%">Methods defined here:<br>
+<dl><dt><a name="wxSerialPort-ChangeLineState"><strong>ChangeLineState</strong></a>(self, lineState)</dt><dd><tt>Change&nbsp;(toggle)&nbsp;the&nbsp;state&nbsp;of&nbsp;each&nbsp;the&nbsp;lines&nbsp;given&nbsp;in&nbsp;the<br>
+linestate&nbsp;parameter.&nbsp;Possible&nbsp;values&nbsp;are&nbsp;wxSERIAL_LINESTATE_DTR<br>
+(means&nbsp;the&nbsp;DTR&nbsp;signal)&nbsp;and/or&nbsp;wxSERIAL_LINESTATE_RTS&nbsp;(RTS&nbsp;signal).<br>
+For&nbsp;example&nbsp;to&nbsp;toggle&nbsp;the&nbsp;RTS&nbsp;line&nbsp;only:<br>
+dev.<a href="#wxSerialPort-ChangeLineState">ChangeLineState</a>(wxSERIAL_LINESTATE_RTS)</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-ClrLineState"><strong>ClrLineState</strong></a>(self, lineState)</dt><dd><tt>Clear&nbsp;the&nbsp;lines&nbsp;given&nbsp;in&nbsp;the&nbsp;linestate&nbsp;parameter.&nbsp;Possible<br>
+values&nbsp;are&nbsp;wxSERIAL_LINESTATE_DTR&nbsp;(means&nbsp;the&nbsp;DTR&nbsp;signal)&nbsp;and/or<br>
+wxSERIAL_LINESTATE_RTS&nbsp;(RTS&nbsp;signal).&nbsp;For&nbsp;example&nbsp;to&nbsp;clear&nbsp;only<br>
+the&nbsp;RTS&nbsp;line:<br>
+dev.<a href="#wxSerialPort-ClrLineState">ClrLineState</a>(wxSERIAL_LINESTATE_RTS)</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-GetAvailableBytes"><strong>GetAvailableBytes</strong></a>(self)</dt><dd><tt>Returns&nbsp;the&nbsp;available&nbsp;bytes&nbsp;in&nbsp;the&nbsp;input&nbsp;queue&nbsp;of&nbsp;the&nbsp;serial<br>
+driver.</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-GetCommErrors"><strong>GetCommErrors</strong></a>(self)</dt><dd><tt>Get&nbsp;the&nbsp;internal&nbsp;communication&nbsp;errors&nbsp;like&nbsp;breaks,&nbsp;framing,<br>
+parity&nbsp;or&nbsp;overrun&nbsp;errors.<br>
+Returns&nbsp;the&nbsp;count&nbsp;of&nbsp;each&nbsp;error&nbsp;as&nbsp;a&nbsp;tuple&nbsp;like&nbsp;this:<br>
+(b,f,o,p)&nbsp;=&nbsp;dev.<a href="#wxSerialPort-GetCommErrors">GetCommErrors</a>()<br>
+b:&nbsp;breaks,&nbsp;f:&nbsp;framing&nbsp;errors,&nbsp;&nbsp;o:&nbsp;overruns,&nbsp;p:&nbsp;parity&nbsp;errors</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-GetLineState"><strong>GetLineState</strong></a>(self)</dt><dd><tt>Returns&nbsp;the&nbsp;current&nbsp;linestates&nbsp;of&nbsp;the&nbsp;CTS,&nbsp;DCD,&nbsp;DSR&nbsp;and&nbsp;RING<br>
+signal&nbsp;line&nbsp;as&nbsp;an&nbsp;integer&nbsp;value&nbsp;with&nbsp;the&nbsp;appropriate&nbsp;bits&nbsp;or<br>
+-1&nbsp;on&nbsp;error.<br>
+For&nbsp;example:<br>
+lines&nbsp;=&nbsp;dev.<a href="#wxSerialPort-GetLineState">GetLineState</a>()<br>
+if&nbsp;lines&nbsp;&amp;&nbsp;wxSERIAL_LINESTATE_CTS:<br>
+&nbsp;&nbsp;&nbsp;&nbsp;print&nbsp;"CTS&nbsp;is&nbsp;on"</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-Open"><strong>Open</strong></a>(self, devname, baudrate, protocol<font color="#909090">='8N1'</font>, handshake<font color="#909090">='no_handshake'</font>)</dt><dd><tt>Open&nbsp;the&nbsp;device&nbsp;devname&nbsp;with&nbsp;the&nbsp;given&nbsp;baudrate,&nbsp;the&nbsp;protocol<br>
+like&nbsp;'8N1'&nbsp;(default)&nbsp;and&nbsp;the&nbsp;use&nbsp;of&nbsp;the&nbsp;handshake&nbsp;[no_handshake<br>
+(default),&nbsp;rtscts&nbsp;or&nbsp;xonxoff]<br>
+For&nbsp;example:<br>
+At&nbsp;Linux:<br>
+dev&nbsp;=&nbsp;<a href="#wxSerialPort">wxSerialPort</a>()<br>
+dev.<a href="#wxSerialPort-Open">Open</a>("/dev/ttyS0",115200)<br>
+or&nbsp;with&nbsp;a&nbsp;datalen&nbsp;of&nbsp;7&nbsp;bits,&nbsp;even&nbsp;parity,&nbsp;2&nbsp;stopbits&nbsp;and&nbsp;rts/cts<br>
+handshake:<br>
+dev.<a href="#wxSerialPort-Open">Open</a>("/dev/ttyS0",115200,'7E2',True)<br>
+At&nbsp;Windows:<br>
+dev&nbsp;=&nbsp;<a href="#wxSerialPort">wxSerialPort</a>()<br>
+dev.<a href="#wxSerialPort-Open">Open</a>("COM1",115200)<br>
+dev.<a href="#wxSerialPort-Open">Open</a>("COM1",115200,'7E2',True)<br>
+Returns&nbsp;the&nbsp;handle&nbsp;on&nbsp;success&nbsp;or&nbsp;a&nbsp;negativ&nbsp;value&nbsp;on&nbsp;failure.</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-Reset"><strong>Reset</strong></a>(self)</dt><dd><tt>Send&nbsp;a&nbsp;break&nbsp;for&nbsp;0.25s.</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-SetBaudRate"><strong>SetBaudRate</strong></a>(self, baudrate)</dt><dd><tt>Set&nbsp;the&nbsp;baudrate&nbsp;for&nbsp;the&nbsp;device.</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-SetLineState"><strong>SetLineState</strong></a>(self, lineState)</dt><dd><tt>Set&nbsp;the&nbsp;lines&nbsp;given&nbsp;in&nbsp;the&nbsp;linestate&nbsp;parameter.&nbsp;Possible<br>
+values&nbsp;are&nbsp;wxSERIAL_LINESTATE_DTR&nbsp;(means&nbsp;the&nbsp;DTR&nbsp;signal)&nbsp;and/or<br>
+wxSERIAL_LINESTATE_RTS&nbsp;(RTS&nbsp;signal).&nbsp;For&nbsp;example&nbsp;to&nbsp;set&nbsp;both:<br>
+dev.<a href="#wxSerialPort-SetLineState">SetLineState</a>(wxSERIAL_LINESTATE_DTR&nbsp;|&nbsp;wxSERIAL_LINESTATE_RTS)</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-__del__"><strong>__del__</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxSerialPort-__init__"><strong>__init__</strong></a>(self)</dt></dl>
+
+<hr>
+Methods inherited from <a href="ctb.html#wxIOBase">wxIOBase</a>:<br>
+<dl><dt><a name="wxSerialPort-Close"><strong>Close</strong></a>(self)</dt></dl>
+
+<dl><dt><a name="wxSerialPort-GetTimeout"><strong>GetTimeout</strong></a>(self)</dt><dd><tt>Returns&nbsp;the&nbsp;internal&nbsp;timeout&nbsp;value&nbsp;in&nbsp;milliseconds</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-Ioctl"><strong>Ioctl</strong></a>(self, cmd, arg)</dt></dl>
+
+<dl><dt><a name="wxSerialPort-PutBack"><strong>PutBack</strong></a>(self, char)</dt></dl>
+
+<dl><dt><a name="wxSerialPort-Read"><strong>Read</strong></a>(self, length)</dt><dd><tt>Try&nbsp;to&nbsp;read&nbsp;the&nbsp;given&nbsp;count&nbsp;of&nbsp;data&nbsp;(length)&nbsp;and&nbsp;returns&nbsp;the<br>
+successfully&nbsp;readed&nbsp;number&nbsp;of&nbsp;data.&nbsp;The&nbsp;function&nbsp;never&nbsp;blocks.<br>
+For&nbsp;example:<br>
+readed&nbsp;=&nbsp;dev.<a href="#wxSerialPort-Read">Read</a>(100)</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-ReadBinary"><strong>ReadBinary</strong></a>(self, eos<font color="#909090">='<font color="#c040c0">\n</font>'</font>)</dt><dd><tt>Special&nbsp;SCPI&nbsp;command.&nbsp;Read&nbsp;the&nbsp;next&nbsp;data&nbsp;coded&nbsp;as&nbsp;a&nbsp;SCPI<br>
+binary&nbsp;format.<br>
+A&nbsp;binary&nbsp;data&nbsp;transfer&nbsp;will&nbsp;be&nbsp;startet&nbsp;by&nbsp;'#'.&nbsp;The&nbsp;next&nbsp;byte<br>
+tells&nbsp;the&nbsp;count&nbsp;of&nbsp;bytes&nbsp;for&nbsp;the&nbsp;binary&nbsp;length&nbsp;header,<br>
+following&nbsp;by&nbsp;the&nbsp;length&nbsp;bytes.&nbsp;After&nbsp;these&nbsp;the&nbsp;data&nbsp;begins.<br>
+For&nbsp;example:<br>
+#500004xxxx<br>
+The&nbsp;header&nbsp;length&nbsp;covers&nbsp;5&nbsp;Byte,&nbsp;the&nbsp;length&nbsp;of&nbsp;the&nbsp;binary<br>
+data&nbsp;is&nbsp;4&nbsp;(x&nbsp;means&nbsp;the&nbsp;binary&nbsp;data&nbsp;bytes)</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-ReadUntilEOS"><strong>ReadUntilEOS</strong></a>(self, eos<font color="#909090">='<font color="#c040c0">\n</font>'</font>, quota<font color="#909090">=0</font>)</dt><dd><tt><a href="#wxSerialPort-ReadUntilEOS">ReadUntilEOS</a>(eosString="\n",timeout=1000)<br>
+Reads&nbsp;data&nbsp;until&nbsp;the&nbsp;given&nbsp;eos&nbsp;string&nbsp;was&nbsp;received&nbsp;(default&nbsp;is<br>
+the&nbsp;linefeed&nbsp;character&nbsp;(0x0a)&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout<br>
+(default&nbsp;1000ms)&nbsp;was&nbsp;reached.<br>
+ReadUntilEOS&nbsp;returns&nbsp;the&nbsp;result&nbsp;as&nbsp;the&nbsp;following&nbsp;tuple:<br>
+['received&nbsp;string',state,readedBytes]<br>
+If&nbsp;a&nbsp;timeout&nbsp;occurred,&nbsp;state&nbsp;is&nbsp;0,&nbsp;otherwise&nbsp;1</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-Readv"><strong>Readv</strong></a>(self, length)</dt><dd><tt>Try&nbsp;to&nbsp;read&nbsp;the&nbsp;given&nbsp;count&nbsp;of&nbsp;data.&nbsp;Readv&nbsp;blocks&nbsp;until&nbsp;all&nbsp;data<br>
+was&nbsp;readed&nbsp;successfully&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout,&nbsp;set&nbsp;with&nbsp;the<br>
+class&nbsp;member&nbsp;function&nbsp;<a href="#wxSerialPort-SetTimeout">SetTimeout</a>(timeout),&nbsp;was&nbsp;reached.<br>
+Returns&nbsp;the&nbsp;readed&nbsp;data.</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-ResetBus"><strong>ResetBus</strong></a>(self)</dt><dd><tt>If&nbsp;the&nbsp;underlaying&nbsp;interface&nbsp;needs&nbsp;some&nbsp;special&nbsp;reset&nbsp;operations<br>
+(for&nbsp;instance&nbsp;the&nbsp;GPIB&nbsp;distinguish&nbsp;between&nbsp;a&nbsp;normal&nbsp;device&nbsp;reset<br>
+and&nbsp;a&nbsp;special&nbsp;bus&nbsp;reset),&nbsp;you&nbsp;can&nbsp;put&nbsp;some&nbsp;code&nbsp;here)</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-SetTimeout"><strong>SetTimeout</strong></a>(self, timeout)</dt><dd><tt>Set&nbsp;the&nbsp;internal&nbsp;timeout&nbsp;value&nbsp;in&nbsp;milliseconds&nbsp;for&nbsp;all&nbsp;blocked<br>
+operations&nbsp;like&nbsp;ReadUntilEOS,&nbsp;Readv&nbsp;and&nbsp;Writev.</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-Write"><strong>Write</strong></a>(self, string)</dt><dd><tt>Writes&nbsp;the&nbsp;given&nbsp;string&nbsp;to&nbsp;the&nbsp;device&nbsp;and&nbsp;returns&nbsp;immediately.<br>
+Write&nbsp;returns&nbsp;the&nbsp;number&nbsp;of&nbsp;data&nbsp;bytes&nbsp;successfully&nbsp;written&nbsp;or&nbsp;a<br>
+negativ&nbsp;number&nbsp;if&nbsp;an&nbsp;error&nbsp;occured.&nbsp;For&nbsp;some&nbsp;circumstances,&nbsp;not<br>
+the&nbsp;complete&nbsp;string&nbsp;was&nbsp;written.<br>
+So&nbsp;you&nbsp;have&nbsp;to&nbsp;verify&nbsp;the&nbsp;return&nbsp;value&nbsp;to&nbsp;check&nbsp;this&nbsp;out.</tt></dd></dl>
+
+<dl><dt><a name="wxSerialPort-Writev"><strong>Writev</strong></a>(self, string)</dt><dd><tt>Writes&nbsp;the&nbsp;given&nbsp;string&nbsp;to&nbsp;the&nbsp;device.&nbsp;The&nbsp;function&nbsp;blocks&nbsp;until<br>
+the&nbsp;complete&nbsp;string&nbsp;was&nbsp;written&nbsp;or&nbsp;the&nbsp;internal&nbsp;timeout,&nbsp;set&nbsp;with<br>
+<a href="#wxSerialPort-SetTimeout">SetTimeout</a>(timeout),&nbsp;was&nbsp;reached.<br>
+Writev&nbsp;returns&nbsp;the&nbsp;number&nbsp;of&nbsp;data&nbsp;successfully&nbsp;written&nbsp;or&nbsp;a<br>
+negativ&nbsp;value,&nbsp;if&nbsp;an&nbsp;errors&nbsp;occurred.</tt></dd></dl>
+
+</td></tr></table></td></tr></table><p>
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="section">
+<tr bgcolor="#eeaa77">
+<td colspan=3 valign=bottom>&nbsp;<br>
+<font color="#ffffff" face="helvetica, arial"><big><strong>Functions</strong></big></font></td></tr>
+    
+<tr><td bgcolor="#eeaa77"><tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</tt></td><td>&nbsp;</td>
+<td width="100%"><dl><dt><a name="-GetKey"><strong>GetKey</strong></a>()</dt><dd><tt>Returns&nbsp;the&nbsp;current&nbsp;pressed&nbsp;key&nbsp;or&nbsp;'',&nbsp;if&nbsp;no&nbsp;key&nbsp;is&nbsp;pressed.<br>
+You&nbsp;can&nbsp;simply&nbsp;create&nbsp;a&nbsp;query&nbsp;loop&nbsp;with:<br>
+while&nbsp;<a href="#-GetKey">GetKey</a>()&nbsp;==&nbsp;'':<br>
+&nbsp;&nbsp;&nbsp;&nbsp;...&nbsp;make&nbsp;some&nbsp;stuff&nbsp;...</tt></dd></dl>
+ <dl><dt><a name="-abstract"><strong>abstract</strong></a>()</dt></dl>
+</td></tr></table><p>
+<table width="100%" cellspacing=0 cellpadding=2 border=0 summary="section">
+<tr bgcolor="#55aa55">
+<td colspan=3 valign=bottom>&nbsp;<br>
+<font color="#ffffff" face="helvetica, arial"><big><strong>Data</strong></big></font></td></tr>
+    
+<tr><td bgcolor="#55aa55"><tt>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</tt></td><td>&nbsp;</td>
+<td width="100%"><strong>wxSERIAL_LINESTATE_CTS</strong> = 32<br>
+<strong>wxSERIAL_LINESTATE_DCD</strong> = 64<br>
+<strong>wxSERIAL_LINESTATE_DSR</strong> = 256<br>
+<strong>wxSERIAL_LINESTATE_DTR</strong> = 2<br>
+<strong>wxSERIAL_LINESTATE_NULL</strong> = 0<br>
+<strong>wxSERIAL_LINESTATE_RING</strong> = 128<br>
+<strong>wxSERIAL_LINESTATE_RTS</strong> = 4</td></tr></table>
+</body></html>

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/ctb.py

@@ -0,0 +1,455 @@
+import wxctb, sys, re
+
+DCD = wxctb.LinestateDcd
+CTS = wxctb.LinestateCts
+DSR = wxctb.LinestateDsr
+DTR = wxctb.LinestateDtr
+RING = wxctb.LinestateRing
+RTS = wxctb.LinestateRts
+NULL = wxctb.LinestateNull
+
+def abstract():
+    import inspect
+    caller = inspect.getouterframes(inspect.currentframe())[1][3]
+    raise NotImplementedError(caller + ' must be implemented in subclass')
+
+class IOBase:
+    def __init__(self):
+        self.device = None
+        # set timeout to 1000ms (the default)
+        self.timeout = 1000
+        
+    def __del__(self):
+        pass
+    
+    def Close(self):
+        if self.device:
+            self.device.Close()
+
+    def GetTimeout(self):
+        """
+        Returns the internal timeout value in milliseconds
+        """
+        return self.timeout
+
+    def Ioctl(self,cmd,arg):
+        if self.device:
+            self.device.Ioctl(cmd,arg)
+            
+    def Open(self):
+        abstract()
+
+    def PutBack(self,char):
+        return self.device.PutBack(char)
+    
+    def Read(self,length):
+        """
+        Try to read the given count of data (length) and returns the
+        successfully readed number of data. The function never blocks.
+        For example:
+        readed = dev.Read(100)
+        """
+        buf = "\x00"*(length+1)
+        rd = self.device.Read(buf,length)
+        return buf[0:rd]
+
+    def ReadBinary(self,eos="\n"):
+        """
+        Special SCPI command. Read the next data coded as a SCPI
+        binary format.
+        A binary data transfer will be startet by '#'. The next byte
+        tells the count of bytes for the binary length header,
+        following by the length bytes. After these the data begins.
+        For example:
+        #500004xxxx
+        The header length covers 5 Byte, the length of the binary
+        data is 4 (x means the binary data bytes)
+        """
+        try:
+            eoslen = len(eos)
+            b=self.Readv(2)
+            if len(b) == 2:
+                hl = int(b[1])
+                b = self.Readv(hl)
+                if len(b) == hl:
+                    dl = int(b)
+                    # don't left over the eos string or character in the
+                    # device input buffer
+                    data = self.Readv(dl+eoslen)
+                    # check, if the binary data block is complete
+                    if data[dl] == '#':
+                        # not complete, another block is following
+                        for c in data[dl:dl+eoslen]:
+                            self.PutBack(c)
+
+                        data = data[:dl] + self.ReadBinary()
+                    return data
+        except:
+            pass
+        return ''
+
+    def ReadUntilEOS(self,eos="\n",quota=0):
+        """
+        ReadUntilEOS(eosString=\"\\n\",timeout=1000)
+        Reads data until the given eos string was received (default is
+        the linefeed character (0x0a) or the internal timeout
+        (default 1000ms) was reached.
+        ReadUntilEOS returns the result as the following tuple:
+        ['received string',state,readedBytes]
+        If a timeout occurred, state is 0, otherwise 1
+        """
+        return self.device.ReadUntilEOS("",0,eos,self.timeout,quota)
+
+    def Readv(self,length):
+        """
+        Try to read the given count of data. Readv blocks until all data
+        was readed successfully or the internal timeout, set with the
+        class member function SetTimeout(timeout), was reached.
+        Returns the readed data.
+        """
+        buf = "\x00"*length
+        rd = self.device.Readv(buf,length,self.timeout)
+        return buf[0:rd]
+
+    def ResetBus(self):
+        """
+        If the underlaying interface needs some special reset operations
+        (for instance the GPIB distinguish between a normal device reset
+        and a special bus reset), you can put some code here)
+        """
+        pass
+
+    def SetTimeout(self,timeout):
+        """
+        Set the internal timeout value in milliseconds for all blocked
+        operations like ReadUntilEOS, Readv and Writev.
+        """
+        self.timeout = timeout
+        
+    def Write(self,string):
+        """
+        Writes the given string to the device and returns immediately.
+        Write returns the number of data bytes successfully written or a
+        negativ number if an error occured. For some circumstances, not
+        the complete string was written.
+        So you have to verify the return value to check this out.
+        """
+        return self.device.Write(string,len(string))
+
+    def Writev(self,string):
+        """
+        Writes the given string to the device. The function blocks until
+        the complete string was written or the internal timeout, set with
+        SetTimeout(timeout), was reached.
+        Writev returns the number of data successfully written or a
+        negativ value, if an errors occurred.
+        """
+        return self.device.Writev(string,len(string),self.timeout)
+
+class SerialPort(IOBase):
+    def __init__(self):
+        IOBase.__init__(self)
+
+    def __del__(self):
+        self.Close()
+        
+    def ChangeLineState(self,lineState):
+        """
+        Change (toggle) the state of each the lines given in the
+        linestate parameter. Possible values are DTR and/or RTS.
+        For example to toggle the RTS line only:
+        dev.ChangeLineState(RTS)
+        """
+        self.device.ChangeLineState(lineState)
+
+    def ClrLineState(self,lineState):
+        """
+        Clear the lines given in the linestate parameter. Possible
+        values are DTR and/or RTS. For example to clear only
+        the RTS line:
+        dev.ClrLineState(RTS)
+        """
+        self.device.ClrLineState(lineState)
+
+    def GetAvailableBytes(self):
+        """
+        Returns the available bytes in the input queue of the serial
+        driver.
+        """
+        n = wxctb.new_intp()
+        wxctb.intp_assign(n, 0)
+        self.device.Ioctl(wxctb.CTB_SER_GETINQUE,n)
+        return wxctb.intp_value(n)
+
+    def GetCommErrors(self):
+        """
+        Get the internal communication errors like breaks, framing,
+        parity or overrun errors.
+        Returns the count of each error as a tuple like this:
+        (b,f,o,p) = dev.GetCommErrors()
+        b: breaks, f: framing errors,  o: overruns, p: parity errors
+        """
+        einfo = wxctb.SerialPort_EINFO()
+        self.device.Ioctl(wxctb.CTB_SER_GETEINFO,einfo)
+        return einfo.brk,einfo.frame,einfo.overrun,einfo.parity
+    
+    def GetLineState(self):
+        """
+        Returns the current linestates of the CTS, DCD, DSR and RING
+        signal line as an integer value with the appropriate bits or
+        -1 on error.
+        For example:
+        lines = dev.GetLineState()
+        if lines & CTS:
+            print \"CTS is on\"
+        """
+        return self.device.GetLineState()
+
+    def Open(self,devname,baudrate,protocol='8N1',handshake='no_handshake'):
+        """
+        Open the device devname with the given baudrate, the protocol
+        like '8N1' (default) and the use of the handshake [no_handshake
+        (default), rtscts or xonxoff]
+        For example:
+        At Linux:
+        dev = SerialPort()
+        dev.Open(\"/dev/ttyS0\",115200)
+        or with a datalen of 7 bits, even parity, 2 stopbits and rts/cts
+        handshake:
+        dev.Open(\"/dev/ttyS0\",115200,'7E2',True)
+        At Windows:
+        dev = SerialPort()
+        dev.Open(\"COM1\",115200)
+        dev.Open(\"COM1\",115200,'7E2',True)
+        Returns the handle on success or a negativ value on failure.
+        """
+        # the following parity values are valid:
+        # N:None, O:Odd, E:Even, M:Mark, S:Space
+        parity = {'N':0,'O':1,'E':2,'M':3,'S':4}
+        # the regular expression ensures a valid value for the datalen
+        # (5...8 bit) and the count of stopbits (1,2)
+        reg=re.compile(r"(?P<w>[8765])"r"(?P<p>[NOEMS])"r"(?P<s>[12])")
+        self.device = wxctb.SerialPort()
+        dcs = wxctb.SerialPort_DCS()
+        dcs.baud = baudrate
+        res = reg.search(protocol)
+        # handle the given protocol
+        if res:
+            dcs.wordlen = int(res.group('w'))
+            dcs.stopbits = int(res.group('s'))
+            dcs.parity = parity[res.group('p')]
+        # valid handshake are no one, rts/cts or xon/xoff
+        if handshake == 'rtscts':
+            dcs.rtscts = True
+        elif handshake == 'xonxoff':
+            dcs.xonxoff = True
+        
+        return self.device.Open(devname,dcs)
+    
+    def Reset(self):
+        """
+        Send a break for 0.25s.
+        """
+        self.device.SendBreak(0)
+
+    def SetBaudrate(self,baudrate):
+        """
+        Set the baudrate for the device.
+        """
+        self.device.SetBaudrate(baudrate)
+
+    def SetLineState(self,lineState):
+        """
+        Set the lines given in the linestate parameter. Possible
+        values are DTR and/or RTS. For example to set both:
+        dev.SetLineState( DTR | RTS)
+        """
+        self.device.SetLineState(lineState)
+
+    def SetParityBit(self,parity):
+        """
+        Set the parity bit explicitly to 0 or 1. Use this function, if
+        you would like to simulate a 9 bit wordlen at what the ninth bit
+        was represented by the parity bit value. For example:
+        dev.SetParityBit( 0 )
+        dev.Write('some data sent with parity 0')
+        dev.SetParityBit( 1 )
+        dev.Write('another sequence with parity 1')
+        """
+        return self.device.SetParityBit( parity )
+
+class GpibDevice(IOBase):
+    """
+    GPIB class
+    """
+    def __init__(self):
+        IOBase.__init__(self)
+
+    def __del__(self):
+        self.Close()
+
+    def FindListeners(self,board = 0):
+        """
+        Returns the address of the connected devices as a list.
+        If no device is listening, the list is empty. If an error
+        occurs an IOError exception raised. For example:
+        g = GPIB()
+        listeners = g.FindListeners()
+        """
+        listeners = wxctb.GPIB_x_FindListeners(board)
+        if listeners < 0:
+            raise IOError("GPIB board error")
+        result = []
+        for i in range(1,31):
+            if listeners & (1 << i):
+                result.append(i)
+        return result
+
+    def GetEosChar(self):
+        """
+        Get the internal EOS termination character (see SetEosChar).
+        For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosChar()
+        """
+        eos = wxctb.new_intp()
+        wxctb.intp_assign(eos, 0)
+        self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_CHAR,eos)
+        return wxctb.intp_value(eos)
+        
+    def GetEosMode(self):
+        """
+        Get the internal EOS mode (see SetEosMode).
+        For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosMode()
+        """
+        mode = wxctb.new_intp()
+        wxctb.intp_assign(mode, 0)
+        self.device.Ioctl(wxctb.CTB_GPIB_GET_EOS_MODE,mode)
+        return wxctb.intp_value(mode)
+
+    def GetError(self):
+        errorString = " "*256
+        self.device.GetError(errorString,256)
+        return errorString
+
+    def GetSTB(self):
+        """
+        Returns the value of the internal GPIB status byte register.
+        """
+        stb = wxctb.new_intp()
+        wxctb.intp_assign(stb, 0)
+        self.device.Ioctl(wxctb.CTB_GPIB_GETRSP,stb)
+        return wxctb.intp_value(stb)
+
+    # This is only for internal usage!!!
+    def Ibrd(self,length):
+        buf = "\x00"*length
+        state = self.device.Ibrd(buf,length)
+        return state,buf
+
+    # This is only for internal usage!!!
+    def Ibwrt(self,string):
+        return self.device.Ibwrt(string,len(string))
+
+    def Open(self,devname,adr,eosChar=10,eosMode=0x08|0x04):
+        """
+        Open(gpibdevice,address,eosChar,eosMode)
+        Opens a connected device at the GPIB bus. gpibdevice means the
+        controller, (mostly \"gpib1\"), address the address of the desired
+        device in the range 1...31. The eosChar defines the EOS character
+        (default is linefeed), eosMode may be a combination of bits ORed
+        together. The following bits can be used:
+        0x04: Terminate read when EOS is detected.
+        0x08: Set EOI (End or identify line) with EOS on write function
+        0x10: Compare all 8 bits of EOS byte rather than low 7 bits
+              (all read and write functions). Default is 0x12
+        For example:
+        dev = GPIB()
+        dev.Open(\"gpib1\",17)
+        Opens the device with the address 17, linefeed as EOS (default)
+        and eos mode with 0x04 and 0x08.
+        Open returns >= 0 or a negativ value, if something going wrong.
+        """
+        self.device = wxctb.GpibDevice()
+        dcs = wxctb.Gpib_DCS()
+        dcs.m_address1 = adr
+        dcs.m_eosChar = eosChar
+        dcs.m_eosMode = eosMode
+        result = self.device.Open(devname,dcs)
+        return result
+    
+    def Reset(self):
+        """
+        Resets the connected device. In the GPIB definition, the device
+        should be reset to it's initial state, so you can restart a
+        formely lost communication.
+        """
+        self.device.Ioctl(wxctb.CTB_RESET,None)
+
+    def ResetBus(self):
+        """
+        The command asserts the GPIB interface clear (IFC) line for
+        ast least 100us if the GPIB board is the system controller.
+        This initializes the GPIB and makes the interface CIC and
+        active controller with ATN asserted.
+        Note! The IFC signal resets only the GPIB interface functions
+        of the bus devices and not the internal device functions.
+        For a device reset you should use the Reset() command above.
+        """
+        self.device.Ioctl(wxctb.CTB_GPIB_RESET_BUS,None)
+
+    def SetEosChar(self,eos):
+        """
+        Configure the end-of-string (EOS) termination character.
+        Note! Defining an EOS byte does not cause the driver to
+        automatically send that byte at the end of write I/O
+        operations. The application is responsible for placing the
+        EOS byte at the end of the data strings that it defines.
+        (National Instruments NI-488.2M Function Reference Manual)
+        For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosChar(0x10)
+        """
+        intp = wxctb.new_intp()
+        wxctb.intp_assign(intp, eos)
+        return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_CHAR,intp)
+        
+    def SetEosMode(self,mode):
+        """
+        Set the EOS mode (handling).m_eosMode may be a combination 
+        of bits ORed together. The following bits can be used:
+        0x04: Terminate read when EOS is detected.
+        0x08: Set EOI (End or identify line) with EOS on write function
+        0x10: Compare all 8 bits of EOS byte rather than low 7 bits
+        (all read and write functions). For example:
+        g = GPIB()
+        g.Open(\"gpib1\",1)
+        eos = g.GetEosMode(0x04 | 0x08)
+        """
+        intp = wxctb.new_intp()
+        wxctb.intp_assign(intp, mode)
+        return self.device.Ioctl(wxctb.CTB_GPIB_SET_EOS_MODE,intp)
+        
+def GetKey():
+    """
+    Returns the current pressed key or '\0', if no key is pressed.
+    You can simply create a query loop with:
+    while GetKey() == '\0':
+        ... make some stuff ...
+
+    """
+    return wxctb.GetKey()
+
+def GetVersion():
+    """
+    Returns the version of the ctb python module. The numbering
+    has the following format: x.y.z
+    x.y means the version of the underlaying ctb lib, z the version
+    of the python port.
+    """
+    return "0.16"

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/gpib.i

@@ -0,0 +1,96 @@
+%{
+#include "ctb-0.16/gpib.h"
+%}
+
+%include iobase.i
+
+namespace ctb {
+
+%typemap(in) void * dcs (Gpib_DCS tmp) {
+	/* dont check for list */
+	$1 = &tmp;
+}
+
+enum GpibTimeout
+{
+    GpibTimeoutNONE = 0, 
+    GpibTimeout10us, 
+    GpibTimeout30us, 
+    GpibTimeout100us,
+    GpibTimeout300us,
+    GpibTimeout1ms,  
+    GpibTimeout3ms,  
+    GpibTimeout10ms, 
+    GpibTimeout30ms, 
+    GpibTimeout100ms,
+    GpibTimeout300ms,
+    GpibTimeout1s,   
+    GpibTimeout3s,   
+    GpibTimeout10s,  
+    GpibTimeout30s,  
+    GpibTimeout100s, 
+    GpibTimeout300s, 
+    GpibTimeout1000s
+};
+
+struct Gpib_DCS
+{
+    int m_address1;
+    int m_address2;
+    GpibTimeout m_timeout;
+    bool m_eot;
+    unsigned char m_eosChar;
+    unsigned char m_eosMode;
+    Gpib_DCS();
+    ~Gpib_DCS();
+    char* GetSettings();
+}; 
+
+enum {
+    CTB_GPIB_SETADR = CTB_GPIB,
+    CTB_GPIB_GETRSP,
+    CTB_GPIB_GETSTA,
+    CTB_GPIB_GETERR,
+    CTB_GPIB_GETLINES,
+    CTB_GPIB_SETTIMEOUT,
+    CTB_GPIB_GTL,
+    CTB_GPIB_REN,
+    CTB_GPIB_RESET_BUS,
+    CTB_GPIB_SET_EOS_CHAR,
+    CTB_GPIB_GET_EOS_CHAR,
+    CTB_GPIB_SET_EOS_MODE,
+    CTB_GPIB_GET_EOS_MODE
+};
+
+class GpibDevice : public IOBase
+{
+protected:
+    int m_board;
+    int m_hd;
+    int m_state;
+    int m_error;
+    int m_count;
+    int m_asyncio;
+    Gpib_DCS m_dcs;
+    int CloseDevice();
+    int OpenDevice(const char* devname, void* dcs);
+    virtual const char* GetErrorString(int error,bool detailed);
+public:
+    GpibDevice();
+    virtual ~GpibDevice();
+    const char* ClassName();
+    virtual const char* GetErrorDescription(int error);
+    virtual const char* GetErrorNotation(int error);
+    virtual char* GetSettingsAsString();
+    int Ibrd(char* buf,size_t len);
+    int Ibwrt(char* buf,size_t len);
+    virtual int Ioctl(int cmd,void* args);
+    int IsOpen();
+    int Read(char* buf,size_t len);
+    int Write(char* buf,size_t len);
+
+    static int FindListeners(int board = 0);
+
+};
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/iobase.i

@@ -0,0 +1,59 @@
+%{
+#include "ctb-0.16/iobase.h"
+%}
+
+namespace ctb {
+
+enum {
+    CTB_RESET = CTB_COMMON
+};
+
+%typemap(in) char *& readbuf (char * tmp) {
+	/* dont check for list */
+	$1 = &tmp;
+}
+
+%typemap(argout) char *& readbuf {
+	PyObject * plist = PyList_New(2);
+	PyList_SetItem(plist, 0, PyString_FromString(*$1));
+	PyList_SetItem(plist, 1, $result);
+	$result = plist;
+	delete *$1;
+}
+
+%typemap(in) size_t * readedBytes (size_t tmp) {
+	/* dont check for list */
+	$1 = &tmp;
+}
+
+%typemap(argout) size_t * readedBytes {
+     PyList_Append($result, PyInt_FromLong(*$1));
+}
+
+class IOBase
+{
+protected:
+    virtual int CloseDevice() = 0;
+    virtual int OpenDevice(const char* devname, void* dcs = 0L) = 0;
+public:
+    IOBase();
+    virtual ~IOBase();
+
+    virtual const char* ClassName();
+    int Close();
+    virtual int Ioctl(int cmd,void* args);
+    virtual int IsOpen() = 0;
+    int Open(const char* devname,void* dcs=0L);
+    int PutBack(char ch);
+    virtual int Read(char* buf,size_t len) = 0;
+    virtual int ReadUntilEOS(char*& readbuf,
+					    size_t* readedBytes,
+					    char* eosString = "\n",
+					    long timeout_in_ms = 1000L,
+					    char quota = 0);
+    int Readv(char* buf,size_t len,unsigned int timeout_in_ms);
+    virtual int Write(char* buf,size_t len) = 0;
+    int Writev(char* buf,size_t len,unsigned int timeout_in_ms);
+};
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/kbhit.i

@@ -0,0 +1,9 @@
+%{
+#include "ctb-0.16/kbhit.h"
+%}
+
+namespace ctb {
+
+char GetKey();
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/linux/makepy.sh

@@ -0,0 +1,63 @@
+#!/bin/bash
+
+CFLAG=''
+GPIB_SOURCES=''
+GPIB_LIB=''
+GPIB_SUPPORT=''
+
+# the python develop version. Please check the right version of your
+# python developent enviroment
+PYTHON_VERSION='2.6'
+
+for arg in $*; do
+    if [ "$arg" = "USE_GPIB" ]; then
+	   GPIB_SOURCES='../../../src/gpib.cpp' 
+	   GPIB_LIB='-lgpib'
+	   GPIB_SUPPORT='Yes'
+    else
+	   echo '============================================================'
+	   echo 'You run makepy.sh without GPIB support.'
+	   echo 'If you want to create the python wxctb library with'
+	   echo 'GPIB support, rerun the command with:'
+	   echo 'makepy.sh USE_GPIB=1' 
+	   echo '============================================================'
+	   GPIB_SUPPORT='No'
+    fi
+    if [ "$arg" = "USE_DEBUG" ]; then
+	   CFLAG='-g'
+    fi
+done
+
+echo "// This file is created automatically, don't change it!" > wxctb.i
+echo "%module wxctb" >> wxctb.i
+echo "typedef int size_t;" >> wxctb.i
+echo "%include timer.i" >> wxctb.i
+echo "%include serport.i" >> wxctb.i
+echo "%include ../kbhit.i" >> wxctb.i
+if [ "$arg" = "USE_GPIB" ]; then
+    echo "%include ../gpib.i" >> wxctb.i
+fi
+
+echo "swig generates python wrapper files..."
+swig -c++ -Wall -nodefault -python -keyword -new_repr -modern wxctb.i
+
+echo "create shared library wxctb with GPIB=$GPIB_SUPPORT for python"\
+     "$PYTHON_VERSION ..."
+g++ -Wall $CFLAG -shared -I /usr/include/python$PYTHON_VERSION/ \
+    -I ../../../include \
+    wxctb_wrap.cxx  \
+    ../../../src/linux/timer.cpp \
+    ../../../src/linux/serport.cpp \
+    ../../../src/serportx.cpp \
+    ../../../src/kbhit.cpp \
+    ../../../src/iobase.cpp \
+    ../../../src/fifo.cpp \
+    $GPIB_SOURCES \
+    $GPIB_LIB \
+    -o _wxctb.so
+
+echo "copy ctb.py, wxctb.py and _wxctb.so to the module/linux folder..."
+mkdir -p ../../module/linux
+cp ../ctb.py ../../module/linux/
+cp wxctb.py ../../module/linux/
+cp _wxctb.so ../../module/linux/

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/linux/serport.i

@@ -0,0 +1,50 @@
+%module serport
+
+%{
+#include "ctb-0.16/linux/serport.h"
+%}
+
+%include ../serportx.i
+
+namespace ctb {
+
+%pythoncode {
+COM1 = "/dev/ttyS0"
+COM2 = "/dev/ttyS1"
+COM3 = "/dev/ttyS2"
+COM4 = "/dev/ttyS3"
+COM5 = "/dev/ttyS4"
+COM6 = "/dev/ttyS5"
+COM7 = "/dev/ttyS6"
+COM8 = "/dev/ttyS7"
+COM9 = "/dev/ttyS8"
+};
+
+class SerialPort : public SerialPort_x
+{
+protected:
+    int fd;
+    struct termios t, save_t;
+    struct serial_icounter_struct save_info, last_info;
+    speed_t AdaptBaudrate(int baud);
+    
+    int CloseDevice();
+    int OpenDevice(const char* devname, void* dcs);
+public:
+    SerialPort();
+    ~SerialPort();
+
+    int ChangeLineState(SerialLineState flags);
+    int ClrLineState(SerialLineState flags);
+    int GetLineState();
+    int Ioctl(int cmd,void* args);
+    int IsOpen();
+    int Read(char* buf,size_t len);
+    int SendBreak(int duration);
+    int SetBaudrate(int baudrate);
+    int SetLineState(SerialLineState flags);
+    int SetParityBit( bool parity );
+    int Write(char* buf,size_t len);
+};
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/linux/timer.i

@@ -0,0 +1,37 @@
+%{
+#include "ctb-0.16/linux/timer.h"
+%}
+
+%include cpointer.i
+
+// lets create new fuctions for pointer handling in python (for int *exitflag)
+%pointer_functions(int, intp);
+
+namespace ctb {
+
+// perhaps we doesn''t need timer_control to export
+// but we need if we want to inherit from timer in python
+struct timer_control
+{
+    unsigned int usecs;
+    int *exitflag;
+    void* (*exitfnc)(void*);
+};
+
+class Timer
+{
+protected:
+    timer_control control;
+    int stopped;
+    pthread_t tid;
+    unsigned int timer_secs;
+public:
+    Timer(unsigned int msec,int* exitflag,void*(*exitfnc)(void*)=NULL);
+    ~Timer();
+    int start();
+    int stop();
+};
+
+void sleepms(unsigned int ms);
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/linux/wxctb.i

@@ -0,0 +1,6 @@
+// This file is created automatically, don't change it!
+%module wxctb
+typedef int size_t;
+%include timer.i
+%include serport.i
+%include ../kbhit.i

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/linux/wxctb.py

@@ -0,0 +1,264 @@
+# This file was automatically generated by SWIG (http://www.swig.org).
+# Version 1.3.40
+#
+# Do not make changes to this file unless you know what you are doing--modify
+# the SWIG interface file instead.
+
+from sys import version_info
+if version_info >= (2,6,0):
+    def swig_import_helper():
+        from os.path import dirname
+        import imp
+        fp = None
+        try:
+            fp, pathname, description = imp.find_module('_wxctb', [dirname(__file__)])
+        except ImportError:
+            import _wxctb
+            return _wxctb
+        if fp is not None:
+            try:
+                _mod = imp.load_module('_wxctb', fp, pathname, description)
+            finally:
+                fp.close()
+            return _mod
+    _wxctb = swig_import_helper()
+    del swig_import_helper
+else:
+    import _wxctb
+del version_info
+try:
+    _swig_property = property
+except NameError:
+    pass # Python < 2.2 doesn't have 'property'.
+def _swig_setattr_nondynamic(self,class_type,name,value,static=1):
+    if (name == "thisown"): return self.this.own(value)
+    if (name == "this"):
+        if type(value).__name__ == 'SwigPyObject':
+            self.__dict__[name] = value
+            return
+    method = class_type.__swig_setmethods__.get(name,None)
+    if method: return method(self,value)
+    if (not static) or hasattr(self,name):
+        self.__dict__[name] = value
+    else:
+        raise AttributeError("You cannot add attributes to %s" % self)
+
+def _swig_setattr(self,class_type,name,value):
+    return _swig_setattr_nondynamic(self,class_type,name,value,0)
+
+def _swig_getattr(self,class_type,name):
+    if (name == "thisown"): return self.this.own()
+    method = class_type.__swig_getmethods__.get(name,None)
+    if method: return method(self)
+    raise AttributeError(name)
+
+def _swig_repr(self):
+    try: strthis = "proxy of " + self.this.__repr__()
+    except: strthis = ""
+    return "<%s.%s; %s >" % (self.__class__.__module__, self.__class__.__name__, strthis,)
+
+try:
+    _object = object
+    _newclass = 1
+except AttributeError:
+    class _object : pass
+    _newclass = 0
+
+
+def _swig_setattr_nondynamic_method(set):
+    def set_attr(self,name,value):
+        if (name == "thisown"): return self.this.own(value)
+        if hasattr(self,name) or (name == "this"):
+            set(self,name,value)
+        else:
+            raise AttributeError("You cannot add attributes to %s" % self)
+    return set_attr
+
+
+
+def new_intp():
+  return _wxctb.new_intp()
+new_intp = _wxctb.new_intp
+
+def copy_intp(*args, **kwargs):
+  return _wxctb.copy_intp(*args, **kwargs)
+copy_intp = _wxctb.copy_intp
+
+def delete_intp(*args, **kwargs):
+  return _wxctb.delete_intp(*args, **kwargs)
+delete_intp = _wxctb.delete_intp
+
+def intp_assign(*args, **kwargs):
+  return _wxctb.intp_assign(*args, **kwargs)
+intp_assign = _wxctb.intp_assign
+
+def intp_value(*args, **kwargs):
+  return _wxctb.intp_value(*args, **kwargs)
+intp_value = _wxctb.intp_value
+class timer_control(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    def __init__(self, *args, **kwargs): raise AttributeError("No constructor defined")
+    __repr__ = _swig_repr
+    usecs = _swig_property(_wxctb.timer_control_usecs_get, _wxctb.timer_control_usecs_set)
+    exitflag = _swig_property(_wxctb.timer_control_exitflag_get, _wxctb.timer_control_exitflag_set)
+    exitfnc = _swig_property(_wxctb.timer_control_exitfnc_get, _wxctb.timer_control_exitfnc_set)
+timer_control_swigregister = _wxctb.timer_control_swigregister
+timer_control_swigregister(timer_control)
+
+class Timer(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    def __init__(self, *args, **kwargs): 
+        this = _wxctb.new_Timer(*args, **kwargs)
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_Timer
+    __del__ = lambda self : None;
+    def start(self): return _wxctb.Timer_start(self)
+    def stop(self): return _wxctb.Timer_stop(self)
+Timer_swigregister = _wxctb.Timer_swigregister
+Timer_swigregister(Timer)
+
+
+def sleepms(*args, **kwargs):
+  return _wxctb.sleepms(*args, **kwargs)
+sleepms = _wxctb.sleepms
+CTB_RESET = _wxctb.CTB_RESET
+class IOBase(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    def __init__(self, *args, **kwargs): raise AttributeError("No constructor defined - class is abstract")
+    __repr__ = _swig_repr
+    __swig_destroy__ = _wxctb.delete_IOBase
+    __del__ = lambda self : None;
+    def ClassName(self): return _wxctb.IOBase_ClassName(self)
+    def Close(self): return _wxctb.IOBase_Close(self)
+    def Ioctl(self, *args, **kwargs): return _wxctb.IOBase_Ioctl(self, *args, **kwargs)
+    def IsOpen(self): return _wxctb.IOBase_IsOpen(self)
+    def Open(self, *args, **kwargs): return _wxctb.IOBase_Open(self, *args, **kwargs)
+    def PutBack(self, *args, **kwargs): return _wxctb.IOBase_PutBack(self, *args, **kwargs)
+    def Read(self, *args, **kwargs): return _wxctb.IOBase_Read(self, *args, **kwargs)
+    def ReadUntilEOS(self, *args, **kwargs): return _wxctb.IOBase_ReadUntilEOS(self, *args, **kwargs)
+    def Readv(self, *args, **kwargs): return _wxctb.IOBase_Readv(self, *args, **kwargs)
+    def Write(self, *args, **kwargs): return _wxctb.IOBase_Write(self, *args, **kwargs)
+    def Writev(self, *args, **kwargs): return _wxctb.IOBase_Writev(self, *args, **kwargs)
+IOBase_swigregister = _wxctb.IOBase_swigregister
+IOBase_swigregister(IOBase)
+
+ParityNone = _wxctb.ParityNone
+ParityOdd = _wxctb.ParityOdd
+ParityEven = _wxctb.ParityEven
+ParityMark = _wxctb.ParityMark
+ParitySpace = _wxctb.ParitySpace
+LinestateDcd = _wxctb.LinestateDcd
+LinestateCts = _wxctb.LinestateCts
+LinestateDsr = _wxctb.LinestateDsr
+LinestateDtr = _wxctb.LinestateDtr
+LinestateRing = _wxctb.LinestateRing
+LinestateRts = _wxctb.LinestateRts
+LinestateNull = _wxctb.LinestateNull
+class SerialPort_DCS(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    baud = _swig_property(_wxctb.SerialPort_DCS_baud_get, _wxctb.SerialPort_DCS_baud_set)
+    parity = _swig_property(_wxctb.SerialPort_DCS_parity_get, _wxctb.SerialPort_DCS_parity_set)
+    wordlen = _swig_property(_wxctb.SerialPort_DCS_wordlen_get, _wxctb.SerialPort_DCS_wordlen_set)
+    stopbits = _swig_property(_wxctb.SerialPort_DCS_stopbits_get, _wxctb.SerialPort_DCS_stopbits_set)
+    rtscts = _swig_property(_wxctb.SerialPort_DCS_rtscts_get, _wxctb.SerialPort_DCS_rtscts_set)
+    xonxoff = _swig_property(_wxctb.SerialPort_DCS_xonxoff_get, _wxctb.SerialPort_DCS_xonxoff_set)
+    buf = _swig_property(_wxctb.SerialPort_DCS_buf_get, _wxctb.SerialPort_DCS_buf_set)
+    def __init__(self): 
+        this = _wxctb.new_SerialPort_DCS()
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_SerialPort_DCS
+    __del__ = lambda self : None;
+    def GetSettings(self): return _wxctb.SerialPort_DCS_GetSettings(self)
+SerialPort_DCS_swigregister = _wxctb.SerialPort_DCS_swigregister
+SerialPort_DCS_swigregister(SerialPort_DCS)
+
+class SerialPort_EINFO(object):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    brk = _swig_property(_wxctb.SerialPort_EINFO_brk_get, _wxctb.SerialPort_EINFO_brk_set)
+    frame = _swig_property(_wxctb.SerialPort_EINFO_frame_get, _wxctb.SerialPort_EINFO_frame_set)
+    overrun = _swig_property(_wxctb.SerialPort_EINFO_overrun_get, _wxctb.SerialPort_EINFO_overrun_set)
+    parity = _swig_property(_wxctb.SerialPort_EINFO_parity_get, _wxctb.SerialPort_EINFO_parity_set)
+    def __init__(self): 
+        this = _wxctb.new_SerialPort_EINFO()
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_SerialPort_EINFO
+    __del__ = lambda self : None;
+SerialPort_EINFO_swigregister = _wxctb.SerialPort_EINFO_swigregister
+SerialPort_EINFO_swigregister(SerialPort_EINFO)
+
+CTB_SER_GETEINFO = _wxctb.CTB_SER_GETEINFO
+CTB_SER_GETBRK = _wxctb.CTB_SER_GETBRK
+CTB_SER_GETFRM = _wxctb.CTB_SER_GETFRM
+CTB_SER_GETOVR = _wxctb.CTB_SER_GETOVR
+CTB_SER_GETPAR = _wxctb.CTB_SER_GETPAR
+CTB_SER_GETINQUE = _wxctb.CTB_SER_GETINQUE
+CTB_SER_SETPAR = _wxctb.CTB_SER_SETPAR
+class SerialPort_x(IOBase):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    def __init__(self, *args, **kwargs): raise AttributeError("No constructor defined - class is abstract")
+    __repr__ = _swig_repr
+    __swig_destroy__ = _wxctb.delete_SerialPort_x
+    __del__ = lambda self : None;
+    def ClassName(self): return _wxctb.SerialPort_x_ClassName(self)
+    def ChangeLineState(self, *args, **kwargs): return _wxctb.SerialPort_x_ChangeLineState(self, *args, **kwargs)
+    def ClrLineState(self, *args, **kwargs): return _wxctb.SerialPort_x_ClrLineState(self, *args, **kwargs)
+    def GetLineState(self): return _wxctb.SerialPort_x_GetLineState(self)
+    def GetSettingsAsString(self): return _wxctb.SerialPort_x_GetSettingsAsString(self)
+    def Ioctl(self, *args, **kwargs): return _wxctb.SerialPort_x_Ioctl(self, *args, **kwargs)
+    def SendBreak(self, *args, **kwargs): return _wxctb.SerialPort_x_SendBreak(self, *args, **kwargs)
+    def SetBaudrate(self, *args, **kwargs): return _wxctb.SerialPort_x_SetBaudrate(self, *args, **kwargs)
+    def SetLineState(self, *args, **kwargs): return _wxctb.SerialPort_x_SetLineState(self, *args, **kwargs)
+    def SetParityBit(self, *args, **kwargs): return _wxctb.SerialPort_x_SetParityBit(self, *args, **kwargs)
+    IsStandardRate = staticmethod(_wxctb.SerialPort_x_IsStandardRate)
+SerialPort_x_swigregister = _wxctb.SerialPort_x_swigregister
+SerialPort_x_swigregister(SerialPort_x)
+
+def SerialPort_x_IsStandardRate(*args, **kwargs):
+  return _wxctb.SerialPort_x_IsStandardRate(*args, **kwargs)
+SerialPort_x_IsStandardRate = _wxctb.SerialPort_x_IsStandardRate
+
+COM1 = "/dev/ttyS0"
+COM2 = "/dev/ttyS1"
+COM3 = "/dev/ttyS2"
+COM4 = "/dev/ttyS3"
+COM5 = "/dev/ttyS4"
+COM6 = "/dev/ttyS5"
+COM7 = "/dev/ttyS6"
+COM8 = "/dev/ttyS7"
+COM9 = "/dev/ttyS8"
+
+class SerialPort(SerialPort_x):
+    thisown = _swig_property(lambda x: x.this.own(), lambda x, v: x.this.own(v), doc='The membership flag')
+    __repr__ = _swig_repr
+    def __init__(self): 
+        this = _wxctb.new_SerialPort()
+        try: self.this.append(this)
+        except: self.this = this
+    __swig_destroy__ = _wxctb.delete_SerialPort
+    __del__ = lambda self : None;
+    def ChangeLineState(self, *args, **kwargs): return _wxctb.SerialPort_ChangeLineState(self, *args, **kwargs)
+    def ClrLineState(self, *args, **kwargs): return _wxctb.SerialPort_ClrLineState(self, *args, **kwargs)
+    def GetLineState(self): return _wxctb.SerialPort_GetLineState(self)
+    def Ioctl(self, *args, **kwargs): return _wxctb.SerialPort_Ioctl(self, *args, **kwargs)
+    def IsOpen(self): return _wxctb.SerialPort_IsOpen(self)
+    def Read(self, *args, **kwargs): return _wxctb.SerialPort_Read(self, *args, **kwargs)
+    def SendBreak(self, *args, **kwargs): return _wxctb.SerialPort_SendBreak(self, *args, **kwargs)
+    def SetBaudrate(self, *args, **kwargs): return _wxctb.SerialPort_SetBaudrate(self, *args, **kwargs)
+    def SetLineState(self, *args, **kwargs): return _wxctb.SerialPort_SetLineState(self, *args, **kwargs)
+    def SetParityBit(self, *args, **kwargs): return _wxctb.SerialPort_SetParityBit(self, *args, **kwargs)
+    def Write(self, *args, **kwargs): return _wxctb.SerialPort_Write(self, *args, **kwargs)
+SerialPort_swigregister = _wxctb.SerialPort_swigregister
+SerialPort_swigregister(SerialPort)
+
+
+def GetKey():
+  return _wxctb.GetKey()
+GetKey = _wxctb.GetKey
+
+

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/serportx.i

@@ -0,0 +1,84 @@
+%{
+#include "ctb-0.16/serportx.h"
+%}
+
+%include iobase.i
+
+namespace ctb {
+
+enum Parity
+{
+    ParityNone,
+    ParityOdd,
+    ParityEven,
+    ParityMark,
+    ParitySpace
+};
+
+enum SerialLineState
+{
+    LinestateDcd = 0x040,
+    LinestateCts = 0x020,
+    LinestateDsr = 0x100,
+    LinestateDtr = 0x002,
+    LinestateRing = 0x080,
+    LinestateRts = 0x004,
+    LinestateNull = 0x000
+};
+
+struct SerialPort_DCS
+{
+    int baud;
+    Parity parity;
+    unsigned char wordlen;
+    unsigned char stopbits;
+    bool rtscts;
+    bool xonxoff;
+    char buf[16];
+    SerialPort_DCS();
+    ~SerialPort_DCS();
+    char* GetSettings();
+}; 
+
+struct SerialPort_EINFO
+{
+    int brk;
+    int frame;
+    int overrun;
+    int parity;
+    SerialPort_EINFO();
+    ~SerialPort_EINFO();
+};
+
+enum {
+    CTB_SER_GETEINFO = CTB_SERIAL,
+    CTB_SER_GETBRK,
+    CTB_SER_GETFRM,
+    CTB_SER_GETOVR,
+    CTB_SER_GETPAR,
+    CTB_SER_GETINQUE,
+    CTB_SER_SETPAR,
+};
+
+class SerialPort_x : public IOBase
+{
+protected:
+    SerialPort_DCS m_dcs;
+    char m_devname[SERIALPORT_NAME_LEN];
+public:
+    SerialPort_x();
+    virtual ~SerialPort_x();
+    const char* ClassName();
+    virtual int ChangeLineState(SerialLineState flags) = 0;
+    virtual int ClrLineState(SerialLineState flags) = 0;
+    virtual int GetLineState() = 0;
+    virtual char* GetSettingsAsString();
+    virtual int Ioctl(int cmd,void* args);
+    virtual int SendBreak(int duration) = 0;
+    virtual int SetBaudrate(int baudrate) = 0;
+    virtual int SetLineState(SerialLineState flags) = 0;
+    virtual int SetParityBit( bool parity ) = 0;
+    static bool IsStandardRate( long rate );
+};
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/win32/makepy.bat

@@ -0,0 +1,65 @@
+@ECHO OFF
+
+REM ##################################################################
+REM # set the path/settings of your compiler enviroment and remove the
+REM # comment command (REM)
+REM # (you don't need this, if you set it always in your system
+REM # enviroment)
+REM ##################################################################
+REM CALL "c:\Programme\Microsoft Visual C++ Toolkit 2003\vcvars32.bat"
+
+REM ##################################################################
+REM # set the path to your python24 (or python23) library, for example
+REM # works for me with C:\Program Files\Python2.4\libs\python24.lib
+REM ##################################################################
+SET PYTHON_LIB="C:\Program Files\Python2.4\libs\python24.lib"
+
+REM ##################################################################
+REM # set the include path of your python24 (python23) deleveloper
+REM # header files. For me, it's on C:\Program Files
+REM ################################################################## 
+SET PYTHON_INCLUDE="C:\Program Files\Python2.4\include"
+
+REM ##################################################################
+REM # after installing swig, set the path, so the script can find it
+REM ################################################################## 
+SET SWIG="C:\Program Files\swigwin-1.3.40\swig"
+
+REM ##################################################################
+REM # DON'T CHANGE ANYMORE AT THE FOLLOWING LINES!!!
+REM ##################################################################
+
+SET GPIB_LIB=
+SET GPIB_SRC=
+
+ECHO // This file is created automatically, don't change it! > wxctb.i
+ECHO %%module wxctb >> wxctb.i
+ECHO typedef int size_t; >> wxctb.i
+ECHO %%include timer.i >> wxctb.i
+ECHO %%include serport.i >> wxctb.i
+ECHO %%include ../kbhit.i >> wxctb.i
+
+IF NOT [%1]==[USE_GPIB] GOTO nogpib
+SET GPIB_LIB=../../../lib/gpib32.lib
+SET GPIB_SRC=../../../src/gpib.cpp
+ECHO %%include ../gpib.i >> wxctb.i
+
+:nogpib
+
+
+DEL *.obj wxctb_wrap.cxx *.lib *.dll *.exp
+
+ECHO "swig generates python wrapper files..."
+%SWIG% -c++ -Wall -nodefault -python -keyword -new_repr -modern wxctb.i
+
+ECHO "create shared library wxctb for python 2.4..."
+cl /LD /D WIN32 /I %PYTHON_INCLUDE% /I ../../../include wxctb_wrap.cxx ../../../src/win32/serport.cpp ../../../src/serportx.cpp ../../../src/win32/timer.cpp ../../../src/kbhit.cpp ../../../src/iobase.cpp %GPIB_SRC% ../../../src/fifo.cpp /link %PYTHON_LIB% winmm.lib %GPIB_LIB%
+
+MOVE wxctb_wrap.dll _wxctb.dll
+
+ECHO "copy ctb.py, wxctb.py and _wxctb.so to the module/win32 folder..."
+MKDIR ..\..\module\win32
+COPY ..\ctb.py ..\..\module\win32
+COPY wxctb.py ..\..\module\win32
+COPY _wxctb.dll ..\..\module\win32
+

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/win32/serport.i

@@ -0,0 +1,57 @@
+%{
+#include "ctb-0.16/win32/serport.h"	
+%}
+
+%include ../serportx.i
+
+namespace ctb {
+
+%pythoncode {
+COM1 = "com1"
+COM2 = "com2"
+COM3 = "com3"
+COM4 = "com4"
+COM5 = "com5"
+COM6 = "com6"
+COM7 = "com7"
+COM8 = "com8"
+COM9 = "com9"
+COM10 = "\\\\.\\com10"
+COM11 = "\\\\.\\com11"
+COM12 = "\\\\.\\com12"
+COM13 = "\\\\.\\com13"
+COM14 = "\\\\.\\com14"
+COM15 = "\\\\.\\com15"
+COM16 = "\\\\.\\com16"
+COM17 = "\\\\.\\com17"
+COM18 = "\\\\.\\com18"
+COM19 = "\\\\.\\com19"
+};
+
+class SerialPort : public SerialPort_x
+{
+protected:
+    HANDLE fd;
+    OVERLAPPED ov;
+    SerialPort_EINFO einfo;
+      
+    int CloseDevice();
+    int OpenDevice(const char* devname, void* dcs);
+public:
+    SerialPort();
+    ~SerialPort();
+
+    int ChangeLineState(SerialLineState flags);
+    int ClrLineState(SerialLineState flags);
+    int GetLineState();
+    int Ioctl(int cmd,void* args);
+    int IsOpen();
+    int Read(char* buf,size_t len);
+    int SendBreak(int duration);
+    int SetBaudrate(int baudrate);
+    int SetLineState(SerialLineState flags);
+    int SetParityBit( bool parity );
+    int Write(char* buf,size_t len);
+};
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/win32/timer.i

@@ -0,0 +1,39 @@
+%{
+#include "ctb-0.16/win32/timer.h"
+%}
+
+%include cpointer.i
+
+// lets create new fuctions for pointer handling in python (for int *exitflag)
+%pointer_functions(int, intp);
+
+namespace ctb {
+
+// perhaps we doesn''t need timer_control to export
+// but we need if we want to inherit from timer in python
+struct timer_control
+{
+    unsigned int msecs;
+    int *exitflag;
+    MMRESULT stop;
+    void* (*exitfnc)(void*);
+};
+
+class Timer
+{
+protected:
+
+    DWORD id;
+    MMRESULT h;
+    timer_control control;
+    unsigned int timer_secs;
+public:
+    Timer(unsigned int msec,int* exitflag,void*(*exitfnc)(void*)=NULL);
+    ~Timer();
+    int start();
+    int stop();
+};
+
+void sleepms(unsigned int ms);
+
+};

src/mod/endpoints/mod_gsmopen/libctb-0.16/python/src/win32/wxctb.i

@@ -0,0 +1,6 @@
+// This file is created automatically, don't change it! 
+%module wxctb 
+typedef int size_t; 
+%include timer.i 
+%include serport.i 
+%include ../kbhit.i