- Notifies the pre_answer

- Dialplan examples
- New version of commons
- Priority of contexts
- New K3L install script - getk3l.sh
- CLI return in XML
- More options in GET and SET commands
- Events (ESL) to send/receive SMS.
- fax-adjustment-timeout implemented
- accountcode and language
- Owner destroy
- Destroy wait for resources release
- static const expression
- Hangup cause

src/mod/endpoints/mod_khomp/docs/User_Guide.html

@@ -18,7 +18,7 @@
 <p>This step is carried out in a semi-automated way using the <b>khompwizard</b> program, a wizard that configures the basic parameters of the system boards. This wizard initializes the configuration files using information from the user when they are needed, initializing the standard settings to default values.
 </p><p>Typically, this program runs automatically after installation of the system. However, you may need to run it manually if an update is being performed, or if new cards were added to the system after installing new drivers.
 </p><p><br />
-If you need to set advanced parameters of the board and/or signaling, the program <b>k3lconfig</b> allows you to access all the available settings for each installed card. For more information about this program, check the <b><a href="http://169.254.1.3/kdevwiki/wikidocs/index.php?title=K3lconfig_-_User%27s_Guide&amp;action=edit&amp;redlink=1" class="new" title="K3lconfig - User&#39;s Guide (página não existe)">k3lconfig User's Guide</a></b>. For solving synchronization issues, check the <a href="#_Troubleshooting" title="">Troubleshooting</a> section for manual configuration of the boards.
+If you need to set advanced parameters of the board and/or signaling, the program <b>k3lconfig</b> allows you to access all the available settings for each installed card. For more information about this program, check the <b><a href="http://169.254.1.3/kdevwiki/wikidocs/index.php?title=K3lconfig_-_User%27s_Guide&amp;action=edit&amp;redlink=1" class="new" title="K3lconfig - User&#39;s Guide (página não existe)">k3lconfig User's Guide</a></b>. For solving synchronization issues, check the <a href="#Troubleshooting" title="">Troubleshooting</a> section for manual configuration of the boards.
 <br />
 </p>
 <a name="Endpoint_Configuration" id="Endpoint_Configuration"></a><h2> <span class="mw-headline"> Endpoint Configuration </span></h2>
@@ -39,16 +39,21 @@ If you need to set advanced parameters of the board and/or signaling, the progra
 </li><li><b>context-gsm-call</b> (or <b>context-gsm</b>): Context of entry for GSM boards (the default is "khomp-CC-DD", where "DD" will be replaced at the time of connection by the device number, "CC" by channel number, and "SSSS" by the device serial number);
 </li><li><b>context-gsm-sms</b>: Context for incoming SMSs (the default is "khomp-sms-CC-DD", where "DD" will be replaced by the number of device, "CC" by channel number and "SSSS" by the device's serial number);
 </li><li><b>context-pr</b>: Context for incoming connections on boards KPR (default is "khomp-CC-DD", where "DD" will be replaced at the time of connection by the device number, "CC "by channel number);
+</li><li><b>delay-ringback-co</b>: Sets the delay to enable the generation of call control tone (ringback) by the Endpoint Khomp when there is an ringback indication from signaling and there is no audio being sent by the channel which indicated the situation (local option);
+</li><li><b>delay-ringback-pbx</b>: Sets the delay to enable the generation of call control tone (ringback) by the Endpoint Khomp when there is an ringback indication, and the audio has no tone (silence) (local option);
 </li><li><b>disconnect-delay</b>: Sets the time in milliseconds to perform processing a disconnect event, to ignore situations where other equipment performing the double service to overthrow collect calls (local option);
+</li><li><b>drop-collect-call</b>: Enables/Disables the action of dropping collect calls. If enabled, all collect calls will be dropped no matter what KDropCollectCall is set to (the default value is "no");
 </li><li><b>echo-canceller</b> (former 'echocanceller): Active ("yes") or disables ("no") echo cancellation automatic Endpoint (local option);
+</li><li><b>flash-to-digits</b>: Defines the digits to be sent when the FLASH is detected on FXS channels;
 </li><li><b>fxo-send-pre-audio</b>: When enabled ("yes") releases audio channel before the outgoing call connection boards KFXO (the default value is "yes");
+</li><li><b>fxs-digit-timeout</b>: Defines the timeout, in seconds, between digits of a FXS board's extension;
 </li><li><b>fxs-global-orig</b>: Start number for sequencial branch numbering in FXS cards that are not listed in the <b>[fxs-branches]</b> section (the numbering follows ascending order from board number and physical channel number) (default is "0");
 </li><li><b>fxs-co-dialtone</b>: Sequences of numbers, separated by commas, which fires a continuous tone (of central office) in FXS branches (eg: "0,99" means that, when you dial "0" or "99", the user will hear a continuous dial tone) (default is empty);
 </li><li><b>fxs-bina</b>: When enabled ("yes"), calls to FXS lines will send digits corresponding to the source phone identification using BINA DTMF signaling (the default value is "no") (local option);
+</li><li><b>ignore-letter-dtmfs</b>: Defines if the channel should ignore some uncommon DTMF digits detected by the board (A, B, C and D). However, if you need to pass those digits througth the board, you may need to set this option to 'no' (the default value is "yes");
 </li><li><b>input-volume</b>: Sets the volume gain for incoming audio (entering the board), from -10 to +10 (local option);
 </li><li><b>kommuter-activation</b>: Sets whether to activate devices kommuter found in the system will be done automatically ("auto") by the channel, or manually ("manual") by the user through the command "khomp kommuter on/off" 
 </li><li><b>kommuter-timeout</b>: Sets the timeout (in seconds) for initializing the kommuter devices. If this timeout is reached without receiving notification of the channel, the devices will switch back to "off" condition. The minimum value is "0", where the links will always remain switched "on", and the maximum is "255";
-</li><li><b>language</b>: Set language to Khomp channel calls (local option);
 </li><li><b>log-to-console</b>: Set log messages to be printed on the console;
 </li><li><b>log-to-disk</b> (old "log"): Set log messages to be saved to disk;
 </li><li><b>out-of-band-DTMF</b> (former <b>dtmfsuppression</b>): Activate ("yes") or disables ("no") the removal and DTMF sending these out-of-band (local option);
@@ -56,12 +61,9 @@ If you need to set advanced parameters of the board and/or signaling, the progra
 </li><li><b>pulse-forwarding</b> (former 'pulsedetection): Active ("yes") or disables ("no") for the detection of pulses and converting them into DTMF (local option);
 </li><li><b>r2-preconnect-wait</b> (former 'r2preconnectwait): Sets the timeout sending the ringback signaling, protocol R2/MFC to start sending audio silence. Only used when "r2-strict-Behavior" is set to "no" (local option);
 </li><li><b>r2-strict-Behaviour</b>: Enable ("yes") or disables ("no") the behavior of signaling R2/MFC as the standard sets. The default is "no", and can be changed to "yes" if needed to receive / send data precise signaling protocol (condition B, for example) (local option);
-</li><li><b>ringback-delay-co</b>: Sets the delay to enable the generation of call control tone (ringback) by the Endpoint Khomp when there is an ringback indication from signaling and there is no audio being sent by the channel which indicated the situation (local option);
-</li><li><b>ringback-delay-pbx</b>: Sets the delay to enable the generation of call control tone (ringback) by the Endpoint Khomp when there is an ringback indication, and the audio has no tone (silence) (local option);
 </li><li><b>suppression-delay</b> (former <b>suppressiondelay</b>): Activate ("yes") or disables ("no") the delay necessary to suppress DTMF. If disabled ("no"), also disables suppression of DTMF (local option);
 </li><li><b>trace</b>: Set debugging options. Should not be used in production unless absolutely necessary;
-</li><li><b>user-transfer-digits</b>: Defines a sequence of DTMF digits to initiate the transfer between FreeSWITCH&reg; and another PBX (using user signaling, like QSig or FXO FLASH).
-</li><li><b>flash-to-digits</b>: Defines the digits to be sent when the FLASH is detected on FXS channels..
+</li><li><b>user-transfer-digits</b>: Defines a sequence of DTMF digits to initiate the transfer between FreeSWITCH&reg; and another PBX (using user signaling, like QSig or FXO FLASH);
 </li></ul>
 <p><br />
 </p>
@@ -121,15 +123,13 @@ For details, please refer to the configuration file for examples.
 <ul><li>context; 
 </li><li>input-volume; 
 </li><li>output-volume; 
-</li><li>accountcode; 
 </li><li>calleridnum; 
 </li><li>calleridname;
-</li><li>mailbox;
 </li><li>flash-to-digits.
 </li></ul>
 <p>Each option is separated from each other by a pipe "|" or a slash "/" and defined after the colon ":". Example:
 </p>
-<pre>&lt;param name="200" value="language:en|context:master-branch" /&gt;
+<pre>&lt;param name="200" value="input-volume:1|context:master-branch" /&gt;
 </pre>
 <p>For more information on the syntax and examples, please refer to the configuration file.
 </p><p>For more information visit the configuration file '<b>khomp.conf.xml'</b>.