Removal of numerous trailing spaces, to tidy up spandsp in line with the master

version.
This commit is contained in:
Steve Underwood committed 2013-03-14 05:04:43 +08:00
1 parent 4e812bb263
commit 93bb5ca5c7
130 files changed
+494 -498

No files matched your search

+6 -6
View File
@@ -168,7 +168,7 @@ static void codec_munge(int16_t amp[], int len)
{
int i;
uint8_t alaw;
for (i = 0; i < len; i++)
{
alaw = linear_to_alaw (amp[i]);
@@ -288,11 +288,11 @@ int main(int argc, char *argv[])
RRB% = (N+ + N-)/10
Receiver Center Frequency Offset (RCFO) is calculated as follows:
RCFO% = X + (N+ - N-)/20
Note that this test doesn't test what it says it is testing at all,
and the results are quite inaccurate, if not a downright lie! However,
it follows the Mitel procedure, so how can it be bad? :)
The spec calls for +-1.5% +-10Hz of bandwidth.
*/
printf ("Test 3: Recognition bandwidth and channel centre frequency check\n");
@@ -411,11 +411,11 @@ int main(int argc, char *argv[])
printf(" Passed\n");
/* Test 5: Dynamic range
This test sends all possible digits, with gradually increasing
This test sends all possible digits, with gradually increasing
amplitude. We determine the span over which we achieve reliable
detection. The spec says we should detect between -14dBm and 0dBm,
but the tones clip above -3dBm, so this cannot really work. */
printf("Test 5: Dynamic range\n");
for (nplus = nminus = -1000, i = -50; i <= 3; i++)
{
@@ -450,7 +450,7 @@ int main(int argc, char *argv[])
printf(" Passed\n");
/* Test 6: Guard time
This test sends all possible digits, with a gradually reducing
This test sends all possible digits, with a gradually reducing
duration. The spec defines a narrow range of tone duration
times we can expect, so as long as we detect reliably at the
specified minimum we should be OK. However, the spec also says
+2 -2
View File
@@ -172,7 +172,7 @@ int main(int argc, char *argv[])
printf("Test failed.\n");
exit(2);
}
tx_bert = bert_init(NULL, 0, BERT_PATTERN_7_TO_1, 300, 20);
rx_bert = bert_init(NULL, 0, BERT_PATTERN_7_TO_1, 300, 20);
for (i = 0; i < 511*2; i++)
@@ -447,7 +447,7 @@ int main(int argc, char *argv[])
// bert_put_bit(bert, bit);
bert_put_bit(bert, bit);
}
printf("Tests passed.\n");
return 0;
}
+12 -12
View File
@@ -49,7 +49,7 @@ uint8_t to[1000000];
static __inline__ int top_bit_dumb(unsigned int data)
{
int i;
if (data == 0)
return -1;
for (i = 31; i >= 0; i--)
@@ -64,7 +64,7 @@ static __inline__ int top_bit_dumb(unsigned int data)
static __inline__ int bottom_bit_dumb(unsigned int data)
{
int i;
if (data == 0)
return -1;
for (i = 0; i < 32; i++)
@@ -80,11 +80,11 @@ static __inline__ uint8_t bit_reverse8_dumb(uint8_t data)
{
int i;
int result;
result = 0;
for (i = 0; i < 8; i++)
{
result = (result << 1) | (data & 1);
result = (result << 1) | (data & 1);
data >>= 1;
}
return result;
@@ -95,11 +95,11 @@ static __inline__ uint32_t bit_reverse_4bytes_dumb(uint32_t data)
{
int i;
uint32_t result;
result = 0;
for (i = 0; i < 8; i++)
{
result = (result << 1) | (data & 0x01010101);
result = (result << 1) | (data & 0x01010101);
data >>= 1;
}
return result;
@@ -110,11 +110,11 @@ static __inline__ uint16_t bit_reverse16_dumb(uint16_t data)
{
int i;
uint16_t result;
result = 0;
for (i = 0; i < 16; i++)
{
result = (result << 1) | (data & 1);
result = (result << 1) | (data & 1);
data >>= 1;
}
return result;
@@ -125,11 +125,11 @@ static __inline__ uint32_t bit_reverse32_dumb(uint32_t data)
{
int i;
uint32_t result;
result = 0;
for (i = 0; i < 32; i++)
{
result = (result << 1) | (data & 1);
result = (result << 1) | (data & 1);
data >>= 1;
}
return result;
@@ -154,7 +154,7 @@ static __inline__ int one_bits32_dumb(uint32_t x)
{
int i;
int bits;
bits = 0;
for (i = 0; i < 32; i++)
{
@@ -165,7 +165,7 @@ static __inline__ int one_bits32_dumb(uint32_t x)
return bits;
}
/*- End of function --------------------------------------------------------*/
int main(int argc, char *argv[])
{
int i;
+1 -1
View File
@@ -153,7 +153,7 @@ int main(int argc, char *argv[])
}
bitstream_flush(s, &w);
printf("%d bits written\n", total_bits);
for (cc = buffer; cc < w; cc++)
printf("%02X ", *cc);
printf("\n");
+3 -3
View File
@@ -79,7 +79,7 @@ int main(int argc, char *argv[])
printf("CRC module tests\n");
/* TODO: This doesn't check every function in the module */
/* Try a few random messages through the CRC logic. */
printf("Testing the CRC-16 routines\n");
for (i = 0; i < 100; i++)
@@ -93,7 +93,7 @@ int main(int argc, char *argv[])
}
}
printf("Test passed.\n\n");
printf("Testing the CRC-16 byte by byte and bit by bit routines\n");
for (i = 0; i < 100; i++)
{
@@ -111,7 +111,7 @@ int main(int argc, char *argv[])
}
}
printf("Test passed.\n\n");
printf("Testing the CRC-32 routines\n");
for (i = 0; i < 100; i++)
{
+5 -5
View File
@@ -216,7 +216,7 @@ int echo_can_monitor_line_spectrum_update(const int16_t amp[], int len)
#endif
}
s->in_ptr = 0;
#if defined(HAVE_FFTW3_H)
#if defined(HAVE_FFTW3_H)
fftw_execute(s->p);
#else
fftw_one(s->p, s->in, s->out);
@@ -227,7 +227,7 @@ int echo_can_monitor_line_spectrum_update(const int16_t amp[], int len)
for (i = 0; i < 512; i++)
{
s->spec_re_plot[2*i] = i*4000.0/512.0;
#if defined(HAVE_FFTW3_H)
#if defined(HAVE_FFTW3_H)
s->spec_re_plot[2*i + 1] = 10.0*log10((s->out[i][0]*s->out[i][0] + s->out[i][1]*s->out[i][1])/(256.0*32768*256.0*32768) + 1.0e-10) + 3.14;
#else
s->spec_re_plot[2*i + 1] = 10.0*log10((s->out[i].re*s->out[i].re + s->out[i].im*s->out[i].im)/(256.0*32768*256.0*32768) + 1.0e-10) + 3.14;
@@ -394,7 +394,7 @@ int start_echo_can_monitor(int len)
s->w->end();
s->w->show();
#if defined(HAVE_FFTW3_H)
#if defined(HAVE_FFTW3_H)
s->p = fftw_plan_dft_1d(1024, s->in, s->out, FFTW_BACKWARD, FFTW_ESTIMATE);
for (i = 0; i < 1024; i++)
{
@@ -416,7 +416,7 @@ int start_echo_can_monitor(int len)
}
/*- End of function --------------------------------------------------------*/
void echo_can_monitor_wait_to_end(void)
void echo_can_monitor_wait_to_end(void)
{
fd_set rfds;
int res;
@@ -437,7 +437,7 @@ void echo_can_monitor_wait_to_end(void)
}
/*- End of function --------------------------------------------------------*/
void echo_can_monitor_update_display(void)
void echo_can_monitor_update_display(void)
{
Fl::check();
Fl::check();
+1 -1
View File
@@ -106,7 +106,7 @@ struct faxtester_state_s
int current_tx_type;
int wait_for_silence;
int tone_state;
int64_t tone_on_time;
+2 -2
View File
@@ -417,7 +417,7 @@ int start_line_model_monitor(int len)
}
/*- End of function --------------------------------------------------------*/
void line_model_monitor_wait_to_end(void)
void line_model_monitor_wait_to_end(void)
{
fd_set rfds;
int res;
@@ -438,7 +438,7 @@ void line_model_monitor_wait_to_end(void)
}
/*- End of function --------------------------------------------------------*/
void line_model_monitor_update_display(void)
void line_model_monitor_update_display(void)
{
Fl::check();
Fl::check();
+7 -7
View File
@@ -115,13 +115,13 @@ static void test_one_way_model(int line_model_no, int speech_test)
int i;
int j;
awgn_state_t noise1;
if ((model = one_way_line_model_init(line_model_no, -50, channel_codec, rbs_pattern)) == NULL)
{
fprintf(stderr, " Failed to create line model\n");
exit(2);
}
awgn_init_dbm0(&noise1, 1234567, -10.0f);
if (speech_test)
@@ -157,7 +157,7 @@ static void test_one_way_model(int line_model_no, int speech_test)
}
for (j = 0; j < samples; j++)
{
one_way_line_model(model,
one_way_line_model(model,
&output1[j],
&input1[j],
1);
@@ -204,7 +204,7 @@ static void test_both_ways_model(int line_model_no, int speech_test)
int j;
awgn_state_t noise1;
awgn_state_t noise2;
if ((model = both_ways_line_model_init(line_model_no,
-50,
-15.0f,
@@ -219,7 +219,7 @@ static void test_both_ways_model(int line_model_no, int speech_test)
fprintf(stderr, " Failed to create line model\n");
exit(2);
}
awgn_init_dbm0(&noise1, 1234567, -10.0f);
awgn_init_dbm0(&noise2, 1234567, -10.0f);
@@ -268,7 +268,7 @@ static void test_both_ways_model(int line_model_no, int speech_test)
}
for (j = 0; j < samples; j++)
{
both_ways_line_model(model,
both_ways_line_model(model,
&output1[j],
&input1[j],
&output2[j],
@@ -339,7 +339,7 @@ static void test_line_filter(int line_model_no)
if (++p == 129)
p = 0;
ptr = p;
/* Apply the filter */
out = 0.0f;
for (j = 0; j < 129; j++)
+3 -3
View File
@@ -149,13 +149,13 @@ int main(int argc, char *argv[])
fprintf(stderr, " Cannot create audio file '%s'\n", OUT_FILE_NAME);
exit(2);
}
if ((lpc10_enc_state = lpc10_encode_init(NULL, TRUE)) == NULL)
{
fprintf(stderr, " Cannot create encoder\n");
exit(2);
}
if ((lpc10_dec_state = lpc10_decode_init(NULL, TRUE)) == NULL)
{
fprintf(stderr, " Cannot create decoder\n");
@@ -226,7 +226,7 @@ int main(int argc, char *argv[])
exit(2);
}
}
if (sf_close_telephony(outhandle))
{
fprintf(stderr, " Cannot close audio file '%s'\n", OUT_FILE_NAME);
+6 -6
View File
@@ -114,7 +114,7 @@ void media_monitor_rx(int seq_no, double departure_time, double arrival_time)
}
s->received_delays = new Ca_Line(2000, s->received_delays_plot, 0, 0, FL_BLUE, CA_NO_POINT);
if (s->sent_re)
delete s->sent_re;
@@ -126,7 +126,7 @@ void media_monitor_rx(int seq_no, double departure_time, double arrival_time)
s->sent_re_plot[2*(i%500) + 1] = 0.0;
}
s->sent_re_plot[2*(seq_no%500) + 1] = fdiff;
if (fdiff > s->sent_re_plot_max)
{
s->sent_re_plot_max = fdiff;
@@ -157,7 +157,7 @@ int start_media_monitor(void)
float y;
int i;
int len;
len = 128;
s->w = new Fl_Double_Window(465, 400, "IP streaming media monitor");
@@ -255,7 +255,7 @@ int start_media_monitor(void)
s->received_delays_plot_max = 0.0;
s->min_diff = 2000;
s->max_diff = 0;
s->received_delays = NULL;
s->highest_seq_no_seen = -1;
@@ -278,7 +278,7 @@ int start_media_monitor(void)
}
/*- End of function --------------------------------------------------------*/
void media_monitor_wait_to_end(void)
void media_monitor_wait_to_end(void)
{
fd_set rfds;
int res;
@@ -299,7 +299,7 @@ void media_monitor_wait_to_end(void)
}
/*- End of function --------------------------------------------------------*/
void media_monitor_update_display(void)
void media_monitor_update_display(void)
{
Fl::check();
Fl::check();
+6 -6
View File
@@ -61,7 +61,7 @@ struct qam_monitor_s
Fl_Group *c_right;
Fl_Group *c_eq;
Fl_Group *c_symbol_track;
/* Constellation stuff */
Ca_Canvas *canvas_const;
Ca_X_Axis *sig_i;
@@ -202,7 +202,7 @@ int qam_monitor_update_equalizer(qam_monitor_t *s, const complexf_t *coeffs, int
if (max < coeffs[i].im)
max = coeffs[i].im;
}
s->eq_x->minimum(-len/4.0);
s->eq_x->maximum(len/4.0);
s->eq_y->maximum((max == min) ? max + 0.2 : max);
@@ -316,7 +316,7 @@ int qam_monitor_update_audio_level(qam_monitor_t *s, const int16_t amp[], int le
int i;
char buf[11];
double val;
for (i = 0; i < len; i++)
{
s->audio_meter->sample(amp[i]/32768.0);
@@ -385,10 +385,10 @@ qam_monitor_t *qam_monitor_init(float constel_width, float constel_scaling, cons
float x;
float y;
qam_monitor_t *s;
if ((s = (qam_monitor_t *) malloc(sizeof(*s))) == NULL)
return NULL;
s->w = new Fl_Double_Window(905, 400, (tag) ? tag : "QAM monitor");
s->constel_scaling = 1.0/constel_scaling;
@@ -567,7 +567,7 @@ qam_monitor_t *qam_monitor_init(float constel_width, float constel_scaling, cons
}
/*- End of function --------------------------------------------------------*/
void qam_wait_to_end(qam_monitor_t *s)
void qam_wait_to_end(qam_monitor_t *s)
{
fd_set rfds;
int res;
@@ -1,7 +1,7 @@
/*
* SpanDSP - a series of DSP components for telephony
*
* t31_pseudo_terminal_tests.c -
* t31_pseudo_terminal_tests.c -
*
* Written by Steve Underwood <steveu@coppice.org>
*
@@ -125,7 +125,7 @@ static void phase_e_handler(t30_state_t *s, void *user_data, int result)
{
int i;
char tag[20];
i = (intptr_t) user_data;
snprintf(tag, sizeof(tag), "%c: Phase E", i);
printf("Phase E handler on channel %c\n", i);
@@ -316,7 +316,7 @@ static int modem_wait_sock(modem_t *modem, int ms, modem_poll_t flags)
{
if (GetLastError() != ERROR_IO_PENDING)
{
/* Something went horribly wrong with WaitCommEvent(), so
/* Something went horribly wrong with WaitCommEvent(), so
clear all errors and try again */
ClearCommError(modem->master, &comerrors, 0);
}
@@ -412,7 +412,7 @@ static int t30_tests(int t38_mode, int use_ecm, int use_gui, int log_audio, int
#endif
/* Test the T.31 modem against the full FAX machine in spandsp */
/* Set up the test environment */
t38_version = 1;
without_pacing = FALSE;
@@ -580,7 +580,7 @@ static int t30_tests(int t38_mode, int use_ecm, int use_gui, int log_audio, int
while (!done)
{
/* Deal with call setup, through the AT interface. */
/* Deal with call setup, through the AT interface. */
if (test_sending)
{
}
+3 -3
View File
@@ -312,7 +312,7 @@ static void phase_e_handler(t30_state_t *s, void *user_data, int result)
{
int i;
char tag[20];
i = (intptr_t) user_data;
snprintf(tag, sizeof(tag), "%c: Phase E", i);
printf("Phase E handler on channel %c\n", i);
@@ -508,7 +508,7 @@ static int t30_tests(int t38_mode, int use_gui, int log_audio, int test_sending,
SNDFILE *in_handle;
/* Test the T.31 modem against the full FAX machine in spandsp */
/* Set up the test environment */
t38_version = 1;
without_pacing = FALSE;
@@ -668,7 +668,7 @@ static int t30_tests(int t38_mode, int use_gui, int log_audio, int test_sending,
{
if (countdown)
{
/* Deal with call setup, through the AT interface. */
/* Deal with call setup, through the AT interface. */
if (answered)
{
countdown = 0;
+3 -3
View File
@@ -126,7 +126,7 @@ static int rx_data_handler(t38_core_state_t *s, void *user_data, int data_type,
static int tx_packet_handler(t38_core_state_t *s, void *user_data, const uint8_t *buf, int len, int count)
{
t38_core_state_t *t;
t = (t38_core_state_t *) user_data;
span_log(t38_core_get_logging_state(s), SPAN_LOG_FLOW, "Send seq %d, len %d, count %d\n", s->tx_seq_no, len, count);
if (t38_core_rx_ifp_packet(t, buf, len, seq_no) < 0)
@@ -151,7 +151,7 @@ static int encode_decode_tests(t38_core_state_t *a, t38_core_state_t *b)
t38_data_field_t field[MAX_FIELDS];
int i;
int j;
ok_indicator_packets = 0;
bad_indicator_packets = 0;
ok_data_packets = 0;
@@ -296,7 +296,7 @@ static int encode_then_decode_tests(t38_core_state_t *a, t38_core_state_t *b)
int len;
int i;
int j;
ok_indicator_packets = 0;
bad_indicator_packets = 0;
ok_data_packets = 0;
+2 -2
View File
@@ -224,7 +224,7 @@ static int t38_gateway_timing_update(void *user_data, struct timeval *ts)
}
if (t38_gateway_rx(t38_gateway_state, t30_amp, t30_len))
break;
t38_len = t38_gateway_tx(t38_gateway_state, t38_amp, partial);
if (!use_transmit_on_idle)
{
@@ -295,7 +295,7 @@ static uint32_t parse_inet_addr(const char *s)
uint32_t b;
uint32_t c;
uint32_t d;
a = 0;
b = 0;
c = 0;
@@ -645,7 +645,7 @@ int main(int argc, char *argv[])
}
}
printf(" Initial ones from an empty TCF buffer OK\n");
/* Now send some initial ones, and see that we continue to get all ones
as the stuffing. */
memset(buf, 0xFF, 500);
+2 -2
View File
@@ -288,10 +288,10 @@ int main(int argc, char *argv[])
#if defined(SPANDSP_SUPPORT_T42x)
T4_COMPRESSION_ITU_T42,
T4_COMPRESSION_ITU_SYCC_T42,
#endif
#endif
#if defined(SPANDSP_SUPPORT_T43x)
T4_COMPRESSION_ITU_T43,
#endif
#endif
T4_COMPRESSION_ITU_T85,
T4_COMPRESSION_ITU_T85_L0,
//T4_COMPRESSION_ITU_T45,
+9 -9
View File
@@ -99,7 +99,7 @@ static int phase_b_handler(t30_state_t *s, void *user_data, int result)
int i;
int status;
const char *u;
i = (intptr_t) user_data;
status = T30_ERR_OK;
if ((u = t30_get_rx_ident(s)))
@@ -256,10 +256,10 @@ static void phase_e_handler(t30_state_t *s, void *user_data, int result)
{
int i;
char tag[20];
i = (intptr_t) user_data;
snprintf(tag, sizeof(tag), "%c: Phase E", i);
printf("%c: Phase E handler on channel %c - (%d) %s\n", i, i, result, t30_completion_code_to_str(result));
printf("%c: Phase E handler on channel %c - (%d) %s\n", i, i, result, t30_completion_code_to_str(result));
fax_log_final_transfer_statistics(s, tag);
fax_log_tx_parameters(s, tag);
fax_log_rx_parameters(s, tag);
@@ -289,7 +289,7 @@ static void t30_real_time_frame_handler(t30_state_t *s,
static int document_handler(t30_state_t *s, void *user_data, int event)
{
int i;
i = (intptr_t) user_data;
fprintf(stderr, "%d: Document handler on channel %d - event %d\n", i, i, event);
if (next_tx_file[0])
@@ -498,7 +498,7 @@ static int string_to_msg(uint8_t msg[], uint8_t mask[], const char buf[])
static void string_test2(const uint8_t msg[], int len)
{
int i;
if (len > 0)
{
for (i = 0; i < len - 1; i++)
@@ -514,7 +514,7 @@ static void string_test3(const char buf[])
uint8_t mask[1000];
int len;
int i;
len = string_to_msg(msg, mask, buf);
printf("Len = %d: ", len);
string_test2(msg, abs(len));
@@ -671,7 +671,7 @@ static int next_step(faxtester_state_t *s)
s->cur = s->cur->next;
span_log(&s->logging,
SPAN_LOG_FLOW,
SPAN_LOG_FLOW,
"Dir - %s, type - %s, modem - %s, value - %s, timeout - %s, tag - %s\n",
(dir) ? (const char *) dir : "",
(type) ? (const char *) type : "",
@@ -1111,7 +1111,7 @@ static void exchange(faxtester_state_t *s)
span_log_bump_samples(logging, len);
span_log_bump_samples(&s->logging, len);
len = faxtester_tx(s, amp, SAMPLES_PER_CHUNK);
if (fax_rx(fax, amp, len))
break;
@@ -1207,7 +1207,7 @@ static int get_test_set(faxtester_state_t *s, const char *test_file, const char
xmlNodePtr cur;
xmlValidCtxt valid;
ns = NULL;
ns = NULL;
xmlKeepBlanksDefault(0);
xmlCleanupParser();
if ((doc = xmlParseFile(test_file)) == NULL)
+2 -2
View File
@@ -1639,7 +1639,7 @@ static int test_x_06(void)
msg[i] = i + 1;
msg[127] = '\0';
printf("%s\n", msg);
v18_encode_dtmf(NULL, dtmf, msg);
printf("%s\n", dtmf);
@@ -1780,7 +1780,7 @@ static int test_x_12(void)
static void put_v18_msg(void *user_data, const uint8_t *msg, int len)
{
char buf[1024];
memcpy(buf, msg, len);
buf[len] = '\0';
printf("Received (%d bytes) '%s'\n", len, buf);
+5 -5
View File
@@ -87,7 +87,7 @@ endpoint_t endpoint[2];
static void reporter(void *user_data, int reason, bert_results_t *results)
{
endpoint_t *s;
s = (endpoint_t *) user_data;
switch (reason)
{
@@ -100,7 +100,7 @@ static void reporter(void *user_data, int reason, bert_results_t *results)
memcpy(&s->latest_results, results, sizeof(s->latest_results));
break;
default:
fprintf(stderr,
fprintf(stderr,
"V.22bis rx %p BERT report %s\n",
user_data,
bert_event_to_str(reason));
@@ -271,7 +271,7 @@ int main(int argc, char *argv[])
int rbs_pattern;
int guard_tone_option;
int opt;
channel_codec = MUNGE_CODEC_NONE;
rbs_pattern = 0;
test_bps = 2400;
@@ -373,7 +373,7 @@ int main(int argc, char *argv[])
bert_set_report(&endpoint[i].bert_rx, 10000, reporter, &endpoint[i]);
}
#if defined(ENABLE_GUI)
if (use_gui)
{
@@ -420,7 +420,7 @@ int main(int argc, char *argv[])
}
#if 1
both_ways_line_model(model,
both_ways_line_model(model,
model_amp[0],
amp[0],
model_amp[1],
+2 -2
View File
@@ -327,7 +327,7 @@ int main(int argc, char *argv[])
int rbs_pattern;
int opt;
logging_state_t *logging;
channel_codec = MUNGE_CODEC_NONE;
rbs_pattern = 0;
test_bps = 9600;
@@ -551,7 +551,7 @@ int main(int argc, char *argv[])
fprintf(stderr, "Final result %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, bert_results.total_bits, bert_results.bad_bits, bert_results.resyncs);
fprintf(stderr, "Last report %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, latest_results.total_bits, latest_results.bad_bits, latest_results.resyncs);
one_way_line_model_release(line_model);
if (signal_level > -43)
{
printf("Tests failed.\n");
+2 -2
View File
@@ -57,7 +57,7 @@ int out_octets_to_date = 0;
static void frame_handler(void *user_data, const uint8_t *buf, int len)
{
int ret;
if ((ret = write((intptr_t) user_data, buf, len)) != len)
fprintf(stderr, "Write error %d/%d\n", ret, errno);
out_octets_to_date += len;
@@ -198,7 +198,7 @@ int main(int argc, char *argv[])
fprintf(stderr, "Error opening file '%s'.\n", decompressed_file);
exit(2);
}
time(&now);
state_b = v42bis_init(NULL, 3, 512, 6, frame_handler, (void *) (intptr_t) v42bis_fd, 512, data_handler, (void *) (intptr_t) out_fd, 512);
span_log_set_level(v42bis_get_logging_state(state_b), SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_FLOW);
+3 -3
View File
@@ -77,7 +77,7 @@ static int select_modulation(int mask)
static void handler(void *user_data, v8_parms_t *result)
{
const char *s;
s = (const char *) user_data;
printf("%s ", s);
@@ -362,7 +362,7 @@ static int non_v8_calls_v8_tests(SNDFILE *outhandle)
for (i = 0; i < samples; i++)
out_amp[2*i] = amp[i];
/*endfor*/
samples = v8_tx(v8_answerer, amp, SAMPLES_PER_CHUNK);
if (samples < SAMPLES_PER_CHUNK)
{
@@ -472,7 +472,7 @@ static int v8_calls_non_v8_tests(SNDFILE *outhandle)
for (i = 0; i < samples; i++)
out_amp[2*i] = amp[i];
/*endfor*/
samples = modem_connect_tones_tx(non_v8_answerer_tx, amp, SAMPLES_PER_CHUNK);
if (samples < SAMPLES_PER_CHUNK)
{
+4 -4
View File
@@ -37,7 +37,7 @@
static void vec_copyf_dumb(float z[], const float x[], int n)
{
int i;
for (i = 0; i < n; i++)
z[i] = x[i];
}
@@ -97,7 +97,7 @@ static int test_vec_copyf(void)
static void vec_negatef_dumb(float z[], const float x[], int n)
{
int i;
for (i = 0; i < n; i++)
z[i] = -x[i];
}
@@ -157,7 +157,7 @@ static int test_vec_negatef(void)
static void vec_zerof_dumb(float z[], int n)
{
int i;
for (i = 0; i < n; i++)
z[i] = 0.0f;
}
@@ -215,7 +215,7 @@ static int test_vec_zerof(void)
static void vec_setf_dumb(float z[], float x, int n)
{
int i;
for (i = 0; i < n; i++)
z[i] = x;
}
+2 -2
View File
@@ -81,7 +81,7 @@ static int32_t vec_min_maxi16_dumb(const int16_t x[], int n, int16_t out[])
int16_t max;
int16_t temp;
int32_t z;
max = INT16_MIN;
min = INT16_MAX;
for (i = 0; i < n; i++)
@@ -103,7 +103,7 @@ static int32_t vec_min_maxi16_dumb(const int16_t x[], int n, int16_t out[])
return max;
}
/*- End of function --------------------------------------------------------*/
static int test_vec_min_maxi16(void)
{
int i;